NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
Steps
1. Remove the battery.
2. Remove the
base
cover.
3. Remove the
optical
drive.
4. Remove the
memory
modules.
5. Follow the procedure from step 1 to step 3 in
6. Remove the
wireless
card.
7. Remove the keyboard.
8. Remove the
computer
base.
9. Remove the speakers.
10. Remove the
heat-sink
assembly.
11. Remove the
I/O
board.
12. Remove the
system
board.
13. Remove the
power-adapter
14. Remove the
power-button
15. Remove the
display
assembly.
Procedure
About this task
After performing the steps in the prerequisites we are left with the palm-rest assembly.
Removing the palm-rest assembly
computer. After working inside your computer, follow the instructions in
"Removing the hard
port.
board.
drive".
Removing the palm-rest assembly
37
After
57