NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
Steps
1. Slide the tabs on the base cover into the slots on the computer base and snap the base cover into place.
2. Replace the screws that secure the base cover to the computer base.
Post-requisites
About this task
Replace the battery.
20
Replacing the base cover
Replacing the base cover
computer. After working inside your computer, follow the instructions in
10
After