Removing The Display Assembly; Prerequisites; Procedure - Dell Inspiron 14 5000 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.

Prerequisites

Steps
1. Remove the battery.
2. Remove the base cover.
3. Remove the optical drive.
4. Remove the memory modules.
5. Follow the procedure from step 1 to step 3 in
6. Remove the wireless card.
7. Remove the keyboard.
8. Remove the computer base.
9. Remove the heat-sink assembly.
10. Remove the I/O board.
11. Remove the system board.

Procedure

Steps
1. Note the antenna-cable routing and remove the antenna cables from its routing guides on the palm-rest assembly.
2. Note the display-cable routing and remove the cable from its routing guides on the palm-rest assembly.
a. display cable
b. routing guides
c. antenna cables (2)
54

Removing the display assembly

Removing the display assembly
computer. After working inside your computer, follow the instructions in
"Removing the hard drive".
35
After