NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
Steps
1. Remove the battery.
2. Remove the
optical
drive.
3. Remove the
base
cover.
4. Follow the procedure from step 1 to step 3 in
5. Remove the
wireless
card.
6. Remove the keyboard.
Procedure
Steps
1. Lift the latch and disconnect the optical-drive cable from the system board.
2. Remove the screws that secure the computer base to the palm-rest assembly.
a. optical-drive cable
b. latch
c. screws (2)
3. Close the display and turn the computer over.
4. Remove the screws that secure the computer base to the palm-rest assembly.
30
Removing the computer base
Removing the computer base
computer. After working inside your computer, follow the instructions in
"Removing the hard
drive".
19
After