Removing The Optical Drive; Procedure; Post-Requisites - Dell Inspiron 14 5000 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.

Procedure

Steps
1. Align the screw holes on the optical-drive bracket with the screw holes on the optical drive.
2. Replace the screws that secure the optical-drive bracket to the optical drive.
3. Align the tabs on the optical-drive bezel with the slots on the optical-drive assembly and snap the optical-drive bezel into place.
4. Slide the optical-drive assembly into the optical-drive bay and align the screw hole on the optical-drive bracket with the screw hole on
the computer base.
5. Replace the screw that secures the optical-drive assembly to the computer base.

Post-requisites

About this task
Replace the battery.

Removing the optical drive

computer. After working inside your computer, follow the instructions in
Removing the optical drive
6
After
15