NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
Steps
1. Remove the battery.
2. Remove the
base
cover.
Procedure
Steps
1. Remove the screw that secures the wireless-card bracket to the wireless card.
2. Lift the wireless-card bracket off the wireless card.
3. Disconnect the antenna cables from the wireless card.
4. Slide and remove the wireless card out of the wireless-card slot.
1. wireless card
3. screw
5. wireless-card bracket
28
Removing the wireless card
Removing the wireless card
computer. After working inside your computer, follow the instructions in
2. wireless-card slot
4. antenna cables (2)
17
After