NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
About this task
NOTE:
These instructions are applicable only for laptops with a non-touch screen display.
Steps
1. Remove the battery.
2. Remove the
base
cover.
3. Remove the
optical
drive.
4. Remove the
memory
modules.
5. Follow the procedure from step 1 to step 3 in
6. Remove the
wireless
card.
7. Remove the keyboard.
8. Remove the
computer
base.
9. Remove the
heat-sink
assembly.
10. Remove the
I/O
board.
11. Remove the
system
board.
12. Remove the
display
assembly.
Procedure
Steps
1. Using your fingertips, gently pry up the inner edges of the display bezel.
60
Removing the display bezel
Removing the display bezel
computer. After working inside your computer, follow the instructions in
"Removing the hard
drive".
39
After