Manual Priming - Abbott FreeGo Training Manual

MANUAL PRIMING

1. Gently push the lilac
prime tab on the giving set
4. Open the pump door
7. Gently pull down on
the loop
2. Steadily apply pressure
until feed begins to flow (no
need to use a pumping action)
5. Grasp the purple
cassette body
8. Seat lilac cassette into
the pump
10. Close the pump door. You will hear
a click when it has been closed properly
In order to prime the giving set, ensure that the end of the giving set
is free from any attachment/cap
9
3. Completely fill the set by
allowing the feed to expel
air from the tubing
6. Loop pump insert around
wheel, stretching lightly
9. Gently press the tubing
to ensure it is fully seated in
the slots below the cassette