Abbott FreeGo Training Manual page 25

FREEGO
®
PORTABLE BACKPACKS
USING THE FREEGO
1. Set up your pump and
giving set as normal. Then
push the pump into the
padded support in the
backpack, making sure you
haven't caught the giving
set tubing behind it.
4. Fasten the zip allowing
the tubing to move freely
out of the bottom of the
backpack.
Please contact your Healthcare Professional or call Abbott Nutrition on 1800 22 11 66
if you need further information about portable backpacks
PUMP
FEEDING SYSTEM IN THE BACKPACK
®
2. Position your feed bottle
in the backpack as indicated
by the printed lines and
secure in place with the
Velcro straps and the looped
elastic.
5. Connect the giving set to
the feeding tube. Open the
lower pocket and set the
pump to run.
3. Secure the tubing using
the Velcro and coil any
excess tubing.
6. The back panel can be
positioned so the backpack
will stand upright.
22