Plug In And Turn On - Abbott FreeGo Training Manual

PLUG IN AND TURN ON

Insert plug into wall socket and switch on the power supply
When the pump is powered by the AC/mains
a plug icon shows on the LCD and an LED
light above the pump dial illuminates. These
icons indicate the pump's integral battery is
being recharged. During recharging the LCD
battery icon will scroll.
If the battery has been fully depleted it may
take up to 2 minutes for the green LED light
to illuminate when initially connected to the
mains power supply.
Fully-charged, the battery will allow the
pump to work in the event of power failure
or voluntary disconnection from the mains
power supply. Please see page 17 for further
details on how long the battery can power
the pump.
4