Advantech ACP-4320 User Manual page 5

Caution! 16. The computer is provided with a battery-powered real-time clock
circuit. There is a danger of explosion if battery is incorrectly
replaced. Replace only with same or equivalent type recom-
mended by the manufacture. Discard used batteries according to
the manufacturer's instructions.
(1) Risk of Explosion if Battery is replaced by an Incorrect Type.
Dispose of Used Batteries According to the Instructions.
(2) Risque d'explosion si la batterie est remplacée par un type
incorrect. Mettre au rebus les batteries usagées selon les instruc-
tions.
17. THE COMPUTER IS PROVIDED WITH CD DRIVES (or Laser
Product). COMPLY WITH APPROPRIATE SAFETY STANDARDS
INCLUDING IEC 60825-1 or EN 60825-1.
(1) Avoid direct exposure to the laser beam. Do not open the laser
device enclosure. There are no user serviceable components
inside.
(2) Do not operate controls, make adjustments, or perform proce-
dures to the laser device other than those specified herein.
(3) Allow only authorized service technicians to repair the laser
device.
18. This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
19. Always completely disconnect the power cord from your chassis
whenever you work with the hardware. Do not make connections
while the power is on. Sensitive electronic components can be
damaged by sudden power surges.
20. Always ground yourself to remove any static charge before touch-
ing the motherboard, backplane, or add-on cards. Modern elec-
tronic devices are very sensitive to static electric charges. As a
safety precaution, use a grounding wrist strap at all times. Place all
electronic components on a static-dissipative surface or in a static-
shielded bag when they are not in the chassis.
21. Any unverified component could cause unexpected damage. To
ensure the correct installation, please always use the components
(ex. screws) provided with the accessory box.
22. This product is not intended for use by children (this product is not
a toy).
(1) This equipment is not suitable for use in locations where chil-
dren are likely to be present.
23. Improper installation of VESA mounting can result in serious per-
sonal injury! Use suitable mounting apparatus to avoid risk of injury.
VESA mount installation should be operated by professional tech-
nician, please contact the service technician or your retailer if you
need this service.
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
v ACP-4320 User Manual/ 用户手册