Table of Contents
Advertisement
Remote User Interface
IP Menu
The IP menu provides control over DHCP, shows network activity, and includes fields for entering static IP addresses, subnets,
and gateways for both the Control and AES67 Ethernet ports.
Setting IP Addresses
By default, ARC is set up with DHCP enabled and will automatically receive an IP address when its Control Ethernet port is
connected to a network with a DHCP server.
Important!
Both the Control and AES67 connections must be connected to 1000BASE-T (Gigabit) switch ports. If a port
will not be used, it should not be connected to a switch but does require a specific configuration described
below. If both the Control and AES67 ports are used, each must be on a different subnet.
Figure 5-10 – System overview
Chapter 5 |
25
Advertisement
Table of Contents
