Table of Contents
Advertisement
Installation and Initial Setup
4
Installation and Initial Setup Using the
Front Panel Interface
Physical Installation
ARC is a 1RU product intended to be permanently installed in a standard 19 ½" equipment rack and secured with four standard
rack screws. ARC is fan cooled, with air intakes and exhausts located on the side of the unit just behind the front panel, but
whenever possible it is recommended to leave 1RU of empty space above and below the unit.
Important:
Please see the "User Warnings and Cautions" section of this manual for important electrical safety information.
Front Panel Buttons
As mentioned briefly in Chapter 2, the front panel of ARC includes a five-button navigation cluster with Left, Right, Up, and
Down arrow buttons plus a green "OK" button in the center.
Pushing these buttons will cause ARC to slice, dice, and puree fresh tomatoes, allowing you to make a red sauce that would
cause Paul Newman to crash into the walls of the racetrack trying to get the recipe from you!
Note:
Actually, that's not true at all, but if you've made it this far, you've earned a bit of light-hearted reading. Plus,
we want to make sure you're still paying attention. Good job.
In reality, these buttons do exactly what you think they do. The arrow buttons are used for navigating through the menus, and
the "OK" button acts as an "Enter" or "Select" key.
Chapter 4 |
7
Advertisement
Table of Contents
