Table of Contents
Advertisement
Detailed Setup and Configuration
Output Routing
Each output type - SDI, AES67, and AES-3 – has its own sub-menus.
SDI Outputs
To configure the SDI outputs, click on the SDI sub-menu in the "I/O" menu (A).
In the "SDI Out" routing section, use the SDI Out dropdown menus (C) to select which audio sources get routed to each SDI
output pair. These may include processed audio as well as available SDI, AES67, and AES-3 inputs.
By default, the corresponding SDI input pairs are routed to each SDI output, which effectively passes unprocessed input
♦
audio directly to the output
Figure 6-3 – SDI I/O menu
Chapter 6 |
31
Advertisement
Table of Contents
