Remote User Interface
Output Meters
Like the Input Meter, the Output Meter is based on the ITU-R BS1770-4 and EBU-Tech3341 standards and is designed to be
easy to read at a glance while providing a host of detailed information about the output audio.
The meters on the left side of the Output Meter section (A) contain the following information:
The wide blue bars show the RMS audio levels for the left and right channels
♦
The fine blue horizontal lines that float over the bar graph meters are true peak hold indicators
♦
The numeric values at the top of the meter scale indicate the maximum true peak recorded since the Input Meter was last reset
♦
The fine white line with a triangle shows the maximum allowable true peak level (as set by the Maximum True Peak control)
♦
Figure 5-5 – Output meter
Chapter 5 |
18