Table of Contents
Advertisement
Installation and Initial Setup
Chapter 4 |
8
The Home Screen
When ARC first boots up, it displays the Home Screen which includes the Linear Acoustic and ARC logos.
Figure 4-1 – Front panel Home screen
The IP address of the network Control port (used to connect to the remote user interface) is shown in the lower left corner. If a
network connection is detected, the IP address will be yellow. If there is no network connection, the IP address will be red.
The primary reference clock source and status is shown in the lower right corner. Green indicates an active solid reference. Red
indicates an inactive or missing reference.
The Information Screen
Pressing the Right button navigates to the Information screen.
Figure 4-2 – Front panel Information screen
The name of this particular ARC and its location are displayed at the top of the screen. These values can be customized using the
remote interface as detailed in Chapter 5.
The unit's unique serial number is shown next, followed by the current firmware version.
Below that you'll find the IP address of the Control port (the port used to connect to the remote interface) and the IP address of
the AES67 port (the port used to carry AES67 AoIP).
Advertisement
Table of Contents
