Table of Contents
Advertisement
Remote User Interface
Chapter 5 |
21
I/O Menu
The process for setting up input and output configuration is covered in detail in Chapter 6 ("Detailed Setup and
Configuration") and will not be duplicated here, however, an explanation of the information found on the main I/O page is
provided below.
Input Status
At the top of the main I/O page is the Input Status section (A). Each input source – SDI, AES67, and AES-3 – includes a signal
Status indicator to show whether or not a signal is present, and if present, if it has locked to the selected Reference Clock.
The SDI section also displays whether the incoming signal is standard or high definition, and shows the resolution and frame
rate.
Figure 5-7 – Input status
Advertisement
Table of Contents
