Table of Contents
Advertisement
Detailed Setup and Configuration
Chapter 6 |
33
AES67 outputs are configured in the AES67 sub-menu and in much the same was as SDI outputs.
Click on the AES67 sub-menu (A) of the "I/O" menu. Use the AES67 dropdown menu (C) to select which audio gets routed
to each SDI output pair.
Sources may include processed audio as well as available SDI, AES67, and AES-3 inputs.
The multicast address of each desired AES67 input should be entered into the "Address" field of the "AES67 In" section (B).
As with other inputs, you can customize the names of the various AES67 input pairs to make identifying the sources easier.
Click inside the Label field (B) of the "AES67 In" section, type a name, then click the green checkmark to save your changes.
AES-3 Output
Figure 6-5 – AES-3 I/O menu
Advertisement
Table of Contents
