Table of Contents
Advertisement
Remote User Interface
Input Meters
The Input Meters are based on the ITU-R BS1770-4 and EBU-Tech3341 standards. While visually rather simple and easy to
read at a glance, the input meter section contains a wealth of level and loudness information.
The meters on the left side of the Input Meter section (A) contain the following information:
The wide blue bars show the RMS audio levels for the left and right channels
♦
The fine blue horizontal lines that float over the bar graph meters are true peak hold indicators
♦
The numeric values at the top of the meter scale indicate the maximum true peak recorded since the Input Meter was last
♦
reset
The fine white line with a triangle shows the maximum allowable true peak level (as set by the Maximum True Peak
♦
control)
Figure 5-4 – Input meter
Chapter 5 |
16
Advertisement
Table of Contents
