Table of Contents
Advertisement
SPECIFICATIONS:
CNT(COUNT) ---------------------------------------------0~9999
TIME(TIME)-------------------------------------------------0:00~99:59MIN
RPM( STRIDES/MINUTE) ----------------------------0~9999
CAL(CALORIES)------------------------------------------ 0~9999 (0.0~999.9)KCAL
DIST(DISTANCE) -----------------------------------0.1-999.9 ML
KEY FUNCTIONS
MODE: Press to select functions, time, calories, rpm, distance, scan, and count.
Hold the button for 2 seconds for a total reset.
OPERATION PROCEDURES
AUTO ON/OFF:
If the machine is put into motion or the mode button is pressed, the computer will become active.
Without any signal
automatically.
MODE:
To select the LOCK MODE setting, press the MODE key when the pointer on the function you wish to
select begins to flash. Once
RESET:
The computer can be reset by pressing and holding the mode button for 3 seconds. Removing the
battery will also reset the computer and return all function settings back to zero.
FUNCTIONS
SCAN: Automatically displays functions in the following order shown: count, time, rpm, calories, and
distance (repeat).
CNT(COUNT): Automatically accumulates the workout count when starting an exercise.
TIME: The total workout time will be shown when starting an exercise.
RPM(STRIDES/MINUTE): Displays current speed during the workout time.
CAL(CALORIES): The calories burned will be displayed when starting the exercise.
DIST ML(DISTANCE): The distance of each workout will be displayed.
BATTERY
1. Computer will stop counting if inactive for 4 seconds.
2. Computer will shut off if inactive for 4 minutes.
3. 1 AAA-1.5V battery as the power supply.
4. Please replace battery when display is difficult to see.
EXERCISE COMPUTER
input,
or if no key is pressed for approximately 4 minutes, the meter will turn off
locked,
only the selected function will be displayed.
10
Version: 1.2
Advertisement
Table of Contents
