EXERCISE COMPUTER
KEY FUNCTIONS:
MODE: Press this button to change the display or to choose a program.
S E T
SET: In the setting mode, press this button to increase the setting value
R E S E T
M O DE
for TIME, COUNT, and CAL.
RESET:
1. In setting mode, press this button to reset the value for TIME, COUNT, and CAL.
2. In monitor mode, hold this button for 3 seconds to reset all values to zero.
FUNCTIONS:
SCAN: Press MODE until "SCAN" appears, the computer will rotate through all the 4 functions: Time,
Count, Cal, Total Count. Each display will be held for 6 seconds.
COUNT (CNT): Displays an instant count with a range from 0 ~ 9999 COUNT. The count value can
be set in advance, when it approaches the preset count, the computer will beep for 10 seconds.
TIME: Counts the total time from exercise start to the end with a range from 0:00 ~ 99:59 M. Exercise
time can be set in advance, when it approaches the preset time, the computer will beep for 10
seconds. The maximum preset time is 99 minutes.
CALORIES (CAL): Counts the total calories burned from exercise start to the end with a range from
0.0 ~ 9999CAL. The calorie value can be set in advance, when it approaches the preset calorie, the
computer will beep for 10 seconds.
TOTAL COUNT (TOTAL): Displays the total count from the first use. The range is from 0 ~ 9999
COUNT.
AUTO ON/OFF & AUTO START/STOP: When there is no signal of exercise or operation for 4
minutes, the power will turn off automatically. Once motion begins, the computer will turn on
automatically.
OPERATION:
SET: Press MODE to choose the display window that needs to be pre-set. Press SET to increase the
value to reach your desired time, calorie, or count. Hold SET to increase the value. Press RESET to
reset values.
BATTERY: When the display screen light begins to fade, remove the batteries and replace with 2 pcs
SIZE AAA, UM4, R03.
Version 3.1
13