Utility Tasks For Setup; Soft Clear; Fast Clock Editor; Dt602 Options Editor - Digitrax Evolution Express Series Manual

7.3 Utility tasks for setup:

To enter the Utility Menu, from the home screen
press the key. Main Menu A will display giving
you a list of menu options. Select 3- UtilityTasks by
pressing the
the Utility Menu

7.3.1 Soft Clear

If the DT602 is plugged into LocoNet in Utility
Menu, pressing the
In this mode the Locomotive speeds are set to zero
and the functions are turned off.

7.3.2 Fast clock editor

In the Utility Task screen press the
the fast clock edit screen. The prompt line covers
the key inputs. The speed knobs change the hours
and minutes and the numeric keys set the fast clock
rate, up to a maximum of x20. Rate of 00 stops the
fast clock. When the values are what you want, press
the "Save" key to update the fast clock back to
the system.

7.3.3 DT602 Options Editor

In the Utility Task screen press the
screen. This is where you can personalize many settings for this throttle.
1. In Options Editor the left knob scrolls through
the available option line ID numbers and the
right knob changes the current setting. The "UP/
DOWN" soft keys will also change the ID num-
ber of the option.
2. When you have the desired setup press the
key to save the settings and exit.
3. Line ID# 40 is the return to Factory Default set-
ting choice, which are good for most usage.
The available Options are described by the text, and
more details are on the Digitrax web site.
The LCD normal brightness level is set by Option ID15 "Max LCD brite
level"and will begin to dim to level ID16 "Min LCD brite level" after ID18
"LCD brite hold delay ". For ID18=0 the LCD is always ON, with no power
saving. ID19 "LCD pwr save delay" sets the time at the lower ID16 level
© 2020 Digitrax, Inc.
key on the keypad. This will enter
key will start a Soft Clear.
UTILITY Menu:
0- Last Menu
1- Soft Clear
2- FastClock edit
3- Throttle Option edit
4- Route edit
5- Duplex RF Scan
6- Duplex Edit
key to enter
EDITING Fast Clock:TIME
Rate:
Do Alarm
key to enter the throttle Options Editor
ID Option Name
1
2
3
4
5
6
7
8
9
10 Expanded Cmds
23 23
00:09
00
DT602 Options Editor:
Ballistic Knobs
Key clicks
Duplex RF allow
IR allow
Fast Clock show
24Hr Clock mode
Fclock Alarm
Enc=>LCD wake
FnKey=>LCD wake
Up Down Change
www.digitrax.com
EXIT
am
Save
State
=on
=on
=on
=on
=off
=off
=off
=off
=off
=off