Table of Contents
Advertisement
Quick Links
DN136D
Fits Many N and HO Scale
Locomotives
.55" x .404" x .2"
13.9mm x 10.3mm x 5 mm
Features:
▪
FX
Function outputs for prototypical lighting effects and on/off control:
3
Constant Brightness Lighting with directional or independent control.
Optimized selectable LED or incandescent lamp operation
Realistic Effects like Ditch lights, Mars lights, strobes, and many more
Configurable Pulse Function available on all function outputs.
FX
& Standard Function Qualifiers operate functions based on direc-
3
tion, F0 on or off, direction and F0, and whether loco is moving.
Function Mapping for custom function setup.
Master Light Switch turns off all lights & functions with one keystroke.
Advanced Consist Function Controls.
▪
Digitrax LocoMotion
The Digitrax LocoMotion System makes them run like the real thing, too!
Scaleable Speed Stabilization (Back EMF) with simple setup & 256
level resolution.
Torque Compensation.
128 Speed Step operation (14 or 28 steps can also be used).
Momentum with acceleration and deceleration.
Normal Direction of Travel is user selectable.
Switching Speed feature for easier and faster access to yard speeds.
3 Step Speed Tables set start, mid and max voltage for custom control.
28 Step Speed Tables with 256 level resolution for precise control.
▪
Program CVs using any Digitrax Compatible Control system without having
to buy any extra equipment.
▪
Digitrax Easy Connect 8 Pin Harness
▪
2 Digit and 4 Digit Addressing.
▪
Basic, Advanced & UniVersal Consisting.
▪
SuperSonic motor drive for silent operation.
▪
Direct mode programming.
▪
Decoder Reset CV with or without speed table reset.
▪
Transponder Equipped ready for transponding on your Layout.
▪
Motor Isolation Protection helps prevent damage to your decoder.
▪
Automatic Analog Mode Conversion when running on DC layout.
▪
Decoder Lock for individual programming of multiple decoders in one loco.
▪
Digitrax "No Worries" Warranty.
© 2014 Digitrax, Inc.
Complete Train Control
Run Your Trains, Not Your Track!
N / HO Scale
Wired Mobile Decoder
Digitrax Easy Connect 8 Pin Harness
1.0 Amp/1.5 Amps Peak
3 FX
System-Your locomotives look like the real thing.
®
— 1 —
Functions, 0.5 Amp
3
www.digitrax.com
Advertisement
Table of Contents
Related Manuals for Digitrax DN136D
Summary of Contents for Digitrax DN136D
- Page 1 ▪ Digitrax LocoMotion System-Your locomotives look like the real thing. ® The Digitrax LocoMotion System makes them run like the real thing, too! Scaleable Speed Stabilization (Back EMF) with simple setup & 256 level resolution. Torque Compensation. 128 Speed Step operation (14 or 28 steps can also be used).
-
Page 2: Parts List
Notice the orientation of the shell to the frame so that you can reinstall correctly. The DN136D uses the DNWH Digitrax Easy Connect 8 Pin Harness System which consists of an approximately 4.5” harness that has a Digitrax 8 Pin plug on one end and wires on the other. -
Page 3: Installation Notes
Customizing Your Decoder Your Digitrax decoder is ready to run and will operate using address 03 with no additional programming. For a more prototypical railroading experience, your decoder can be customized for your specific locomotive by programming some of the Configuration Variables, or CVs, available. - Page 4 Speed Tables-How the Loco Responds to the Throttle With Digitrax LocoMotion, there are two types of speed tables: 3 Step Tables and High Resolution 28 Step Tables. Please see your Decoder Manual for a discussion of the 28 Step Tables.
- Page 5 OFF. To turn on transponding, program CV61 to a value of 002. This al- lows you to use Digitrax transponding to keep track of your rolling stock. When transponding is enabled, the front light of the locomotive will flicker slightly to indicate transponding signal is being communicated.
-
Page 6: Master Light Switch
Function Outputs on the DN136D The DN136D is set up at the factory to control three function outputs. The DN136D is configured to control the forward and reverse lights on the locomo- tive through the white lead and yellow lead using Function 0 (F0F-forward and F0R-reverse) for directional lighting. -
Page 7: Warranty And Repair
That’s it! A simple, straightforward warranty with no tricky language! Visit www.digitrax.com for complete warranty details and instructions for returning items for repair. Please return warranty items directly to Digitrax - DO NOT return items to place of purchase. © 2014 Digitrax, Inc. - Page 8 DN136D Wire-in decoder fits Many N and HO Locomotives Super Available Computer Interface Decoder Programmer Sound Programmer 2443 Transmitter Road Panama City, FL 32404 www.digitrax.com Made in the USA Contact: www.digitrax.com/contact Part 15, Class B RFI Compliant Support: techsupport@digitrax.com Repair: repair@digitrax.com...
Need help?
Do you have a question about the DN136D and is the answer not in the manual?
Questions and answers