How To Charge The Battery - LG ROBOKING VR644 Series Owner's Manual

HOW TO CHARGE THE BATTERY

Automatic charging
The Robot Cleaner returns to the home station at the end of a cleaning cycle
or when its battery is running low.
※ If 10 minutes elapse without the Robot Cleaner moving or the battery is
too low, the power will be automatically turned OFF.
※ Do NOT turn OFF the Main Power Switch as the battery will not be
recharged. If the machine is returned manually with the Main Power
Switch OFF, it announces an error message, "Main power switch on the
back of the Robot cleaner is turned off. Please turn the switch on."
※ In the event that the unit returns to the Home Station due to a low battery
during the cleaning, cleaning will be started, after recharging, from the nearest place of the area which has not
been cleaned before.
※ If Robot Cleaner is unable to dock to the home station on its first attempt, it will try again until it docks successfully.
※ When Robot Cleaner has completed all areas that it can clean, it will return to the home station even when the
battery level is not low.
Manual charging
You can manually charge the battery prior to using the Robot Cleaner for the first time or to charge the
battery during cleaning.
※ If the Robot Cleaner did not start cleaning from the home station or if the Robot Cleaner is manually
charged by pressing the Home button, it may take slightly longer to find the home station.
※ If the Robot Cleaner is within 10 cm of the front of the charging terminal while the power is turned on from
Standby, it will automatically be returned to the home station and charging will begin.
Tip
Take the following precautions when using the home station:
• If foreign material is caught on the charging terminal, charging may not be activated. Wipe the
terminal from time to time with a dry cloth after the power plug is disconnected.(p29)
• To prevent electric shock or damage to the home station, do not touch the charging terminal
with any metallic objects.
• To avoid fire or electric shock, never disassemble or modify the home station.
• Do not to place the Robot cleaner, the home station or power plug near a heating source.
18
Method 1. Attach the Robot Cleaner to the home
station by aligning to the front side of
the home station. A melody sound will be
generated along with an audio message to
start charging.
※ If a voice message, "Main power switch on
the back of the Robot cleaner is turned off.
Please turn the switch on." is announced
repeatedly, then turn on the Main Power
Switch.
Method 2. When the 'HOME' button of the remote
control or the Robot Cleaner is pressed,
charging will be prompted by automatically
generating a searching signal and returning
the Robot Cleaner to the home station.