Controls, Connections And Indicators On The System Monitoring Unit - Fronius Symo Hybrid 3.0-3-S Operating Instructions Manual

-
-
-
-
-
-
-
-
-
-
-
Controls, connec-
tions and indicat-
ors on the sys-
tem monitoring
unit
No
.
(1)
38
Dedicated web page displaying current data and a wide range of settings
Option of connecting directly to Fronius Solar.web
Internet connection via WLAN or LAN
Ability to control the inverter load by specifying power limit values, minimum or max-
imum running times or target running times
Ability to control the inverter via Modbus (TCP)
Ability to assign control priorities
Ability to control the inverter by means of connected meters (Fronius Smart Meter)
Ability to control the inverter via a ripple control signal receiver (e.g. by specifying
the reactive power or effective power)
Dynamic power reduction, taking self-consumption into account
Ability to control battery charging in line with the control targets set
Ability to control emergency power mode
(9) (8) (7)
Function
IP switch
For switching the IP address:
Switch position A
Default IP address with activating of the WLAN access point
Setting the IP switch to position A also opens an access point to enable a
direct WLAN connection to system monitoring.
Access data for this access point:
Network name: FRONIUS_239.XXXXXX
Key: 12345678
System monitoring can be accessed by:
- Using the DNS name "http://datamanager"
- Using the IP address 169.254.0.180 for the LAN interface
- Using the IP address 192.168.250.181 for the WLAN access point
(1)
(2)
(3)
(6)
LAN
(5)
(4)