Data Communication Area; General - Fronius Symo Hybrid 3.0-3-S Operating Instructions Manual

Data communication
Data communica-
tion area
Item
(1)
(2)
(3)

General

The inverter is fitted with the WLAN-enabled system monitoring and energy management
unit (Fronius Datamanager) as standard.
Various functions are included with the Fronius system monitoring, such as:
(1)
PIN 2 PIN 1
Designation
Switchable multifunction current interface
Use the 2-pin mating connector supplied with the inverter to connect to the
multifunction current interface.
Floating switch contact with mating connector
Max. 250 V AC / 4 A AC
Max. 30 V DC / 1 A DC
Max. 1.5 mm² (AWG 16) cable cross-section
Pin 1 = NO contact (normally open)
Pin 2 = C (common)
Pin 3 = NC contact (normally closed)
Use the mating connector supplied with the inverter to connect to the floating
switch contact.
System monitoring with WLAN antenna
(2)
PIN 1
PIN 2
PIN 3
(3)
37