Advertisement
Jumpers and Connectors (Cont.)
HDAUD1
HD audio extension module connector
USB12
USB port 1, 2 (USB 3.0 port)
PCE-3028: USB port 3 (USB 2.0)
USB3
PCE-4128: USB port 3 (USB 3.0)
USB4
Type A connector on board (USB 2.0)
USB56
USB port 5, 6 (USB 2.0)
USB78
USB port 7, 8 (USB 2.0)
USB910
USB port 9, 10 (USB 2.0)
SATA1
Serial ATA1 (SATA 3.0)
SATA2
Serial ATA2 (SATA 3.0)
Serial ATA3 (For PCE-3028, it is SATA 2.0
SATA3
port, for PCE-4128, it is SATA 3.0 port.)
Serial ATA4 (For PCE-3028, it is SATA 2.0
SATA4
port, for PCE-4128, it is SATA 3.0 port.)
CPU1
CPU Socket
DIMMA1
Memory connector channel A1
DIMMB1
Memory connector channel B1
GPIO1
GPIO pin header
LPC1
Low pin count module expansion pin-header
PWR1
12 V, 5 V power connector
DVI1
DVI connector
(PCE-3028)
DP1/DP2
Display pin header to stack board (Display
(PCE-4128)
type depends on optional stack board)
MINIPCIE1_
m-SATA(default) and mini-PCIe socket
MSATA1
(Optional)
(PCE-4128)
Jumpers
Label
Function
JCMOS1
CMOS clear
Hardware monitor alarm+watchdog
JWDT1+JOBS1
timer output selection
BZ1
Buzzer setting
JME1
Enable ME
JCMOS1: Clear CMOS
Closed Pins
Result
1-2
Keep CMOS (Default)
2-3
Clear CMOS
1
2
3
JOBS1+JWDT1: Hardware monitor alarm+watchdog
timer output selection
Function
Jumper Setting
2-3
Enable watchdog timer (Default)
4-5
Enable Hardware monitor alarm (Default)
1
2
BZ1: Buzzer setting
Closed Pins
Result
3-4
Enable buzzer
Connect 1 & 4
Connecting to external speaker
1
JME1: Enable ME
Closed Pins
Result
1-2
Enable ME
2-3
Disable ME
Software Installation
The drivers for the PCE-3028 are located on the software
installation CD. Please click through the folder and follow
the on screen instructions to install them.
Caution! The computer is supplied with a battery-powered
realtime clock circuit. There is a danger of explo-
sion if battery is incorrectly replaced. Replace
only with same or equivalent type recommended
by the manufacturer. Discard used batteries ac-
cording to manufacturer's instructions.
Declaration of Conformity
This device complies with the requirements in Part 15 of
the FCC rules. Operation is subject to the following two
conditons:
1. This device may not cause harmful interference;
2. This device must accept any interference received,
including interference that may cause undesired opera-
tion.
PCE-3028/PCE-4128 Startup Manual 3
3
4
5
(Default)
2
3
4
(Default)
1
2
3
Advertisement
