Jung DS 4092 TS Product Documentation
  1. Manuals
  2. Brands
  3. Jung Manuals
  4. Accessories
  5. DS 4092 TS
  6. Product documentation
Jung DS 4092 TS Product Documentation

Jung DS 4092 TS Product Documentation

Rotary sensor
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Product documentation
Rotary sensor
Art. No. DS 4092 TS
ALBRECHT JUNG GMBH & CO. KG
Volmestraße 1
58579 Schalksmühle
Telefon: +49.23 55.8 06-0
Telefax: +49.23 55.8 06-2 04
kundencenter@jung.de
www.jung.de
Service Center
Issue: 02.04.2014
Kupferstr. 17-19
TD 6505x320 V2
44532 Lünen
Germany

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS 4092 TS and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Jung DS 4092 TS

Summary of Contents for Jung DS 4092 TS

  • Page 1 Product documentation Rotary sensor Art. No. DS 4092 TS ALBRECHT JUNG GMBH & CO. KG Volmestraße 1 58579 Schalksmühle Telefon: +49.23 55.8 06-0 Telefax: +49.23 55.8 06-2 04 kundencenter@jung.de www.jung.de Service Center Issue: 02.04.2014 Kupferstr. 17-19 TD 6505x320 V2 44532 Lünen...

  • Page 2: Table Of Contents

    Extension inputs (E1, E2, E3) ................ 4.2.4.4.1 Extension function Switching ..............4.2.4.4.2 Extension function Dimming ..............4.2.4.4.3 Extension function Venetian blind ............4.2.4.4.4 Extension function Value transmitter / Scene extension ......Art. No. DS 4092 TS Page 2 of 143...
  • Page 3 Energy saving mode ..................4.2.4.8 Delivery state ....................4.2.5 Parameters ......................4.2.5.1 Parameter push-button / rotary knob ............. 4.2.5.2 Extension inputs parameter ................. 4.2.5.3 Energy saving mode parameter ..............Appendix ........................... Index ........................... Art. No. DS 4092 TS Page 3 of 143...

  • Page 4: Product Definition

    It requires no additional power supply for operation. For project design and commissioning of the device, ETS3.0 from Version "d" onwards, ETS4 from version 4.0.7 onwards or ETS5 is required. Art. No. DS 4092 TS Page 4 of 143...

  • Page 5: Installation, Electrical Connection And Operation

    Do not connect any external voltage to the inputs, since doing so may damage the device(s), and the SELV potential on the KNX bus line will no longer be available. The device may not be opened or operated outside the technical specifications. Art. No. DS 4092 TS Page 5 of 143...

  • Page 6: Device Components

    Figure 1: Device components (View of front side) (1) Status LED (red) (2) Programming button (3) Slide-in shaft for rotary knob with push-button (incremental encoder) (4) Terminals for extension inputs (5) KNX bus connection Art. No. DS 4092 TS Page 6 of 143...

  • Page 7: Fitting And Electrical Connection

    Potential-free contacts (e.g. installation switches or buttons, magnetic contacts) can be connected optionally as required. i The KNX rotary sensor can be installed in various Jung flush-mounted product ranges (series AS, A, CD, LS). For this reason, the frames and covers are design-specific. The design elements must be ordered separately (see accessories).
  • Page 8 Install the device with supporting plate (6) in a flush-mounted appliance box. i Before installing the decorative covers, program the physical address. Mount the design frame (7), the central plate (8) and the control button (9). Art. No. DS 4092 TS Page 8 of 143...

  • Page 9: Commissioning

    In all other cases, the ETS makes a time-optimised partial download in which only the modified data is loaded into the device. Art. No. DS 4092 TS Page 9 of 143...

  • Page 10: Operation

    (turn to the left <-> turn to the right, e.g. dimming), the push-button serves as a push-button function (e.g. switching). The KNX rotary sensor can be installed in various Jung flush-mounted product ranges (series AS, A, CD, LS). For this reason, the frames and covers are design-specific. The design elements must be ordered separately (see accessories).

  • Page 11: Technical Data

    DC 21 ... 32  V SELV Current consumption KNX max. 12.5  m A Connection type for bus Connection terminal Extension inputs Poll voltage, extension inputs approx. 20  V Cable length max. 5  m Art. No. DS 4092 TS Page 11 of 143...

  • Page 12: Software Description

    (rotary knob and push-button) incl. extensions 10FE12 for ETS3.0 extension function and control of an Version d, acoustic signal transmitter and two ETS4 and Status LEDs. ETS5. This application program replaces Version 1.1. Art. No. DS 4092 TS Page 12 of 143...

  • Page 13: Software "Rotary Sensor With Extensions 10Fe1X

    Switching, Value transmitter (1 byte) or Temperature value transmitter (2 bytes) functions. Rotary knob (RK) Free allocation of the functions switching, dimming, Venetian blind, 1-byte value transmitter, 2-byte value transmitter, scene extension. Art. No. DS 4092 TS Page 13 of 143...
  • Page 14 Value adjustment for pushbutton long key-press possible for value transmitter. For light scene extension with memory function, the scene can also be saved without prior recall. Disable object for disabling individual inputs (polarity of the disable object is adjustable). Art. No. DS 4092 TS Page 14 of 143...

  • Page 15: Notes On Software

    (approx. 0.75 Hz). In this case, the device no longer reacts to operations nor does it execute signalling functions anymore. The delivery state (see page 94) described cannot be restored by unloading with the ETS. Art. No. DS 4092 TS Page 15 of 143...

  • Page 16: Object Table

    1: For reading, the R-flag must be set. The last value written to the object via the bus or by the device will be read. Art. No. DS 4092 TS Page 16 of 143...
  • Page 17 50 lux. 1: For reading, the R-flag must be set. The last value written to the object via the bus or by the device will be read. Art. No. DS 4092 TS Page 17 of 143...
  • Page 18 1-byte object for the transmission of value telegrams, if 2-channel operation is activated. 1: For reading, the R-flag must be set. The last value written to the object via the bus or by the device will be read. Art. No. DS 4092 TS Page 18 of 143...
  • Page 19 2-byte object for the transmission of temperature value telegrams if 2-channel operation is activated. 1: For reading, the R-flag must be set. The last value written to the object via the bus or by the device will be read. Art. No. DS 4092 TS Page 19 of 143...

  • Page 20: Objects Rotary Knob

    4-bit object for the transmission of relative dimming telegrams. 1: For reading, the R-flag must be set. The last value written to the object via the bus or by the device will be read. Art. No. DS 4092 TS Page 20 of 143...
  • Page 21 1: For reading, the R-flag must be set. The last value written to the object via the bus will be read. 2: For reading, the R-flag must be set. The last value written to the object via the bus or by the device will be read. Art. No. DS 4092 TS Page 21 of 143...
  • Page 22 1-byte object for recalling or for storing one of 64 scenes max. from a scene push button sensor. 1: For reading, the R-flag must be set. The last value written to the object via the bus or by the device will be read. Art. No. DS 4092 TS Page 22 of 143...

  • Page 23: Objects Disabling Functions Push-Button Rotary Knob

    1: For reading, the R-flag must be set. The last value written to the object via the bus or by the device will be read. Art. No. DS 4092 TS Page 23 of 143...
  • Page 24 1-byte object for recalling or for storing one of 64 scenes max. from a scene push button sensor. 1: For reading, the R-flag must be set. The last value written to the object via the bus or by the device will be read. Art. No. DS 4092 TS Page 24 of 143...
  • Page 25 1-byte object for the transmission of value telegrams, if 2-channel operation is activated. 1: For reading, the R-flag must be set. The last value written to the object via the bus or by the device will be read. Art. No. DS 4092 TS Page 25 of 143...
  • Page 26 1-bit object for transmission of switching telegrams (ON, OFF). 1: For reading, the R-flag must be set. The last value written to the object via the bus or by the device will be read. Art. No. DS 4092 TS Page 26 of 143...
  • Page 27 1: For reading, the R-flag must be set. The last value written to the object via the bus or by the device will be read. 2: For reading, the R-flag must be set. The last value written to the object via the bus will be read. Art. No. DS 4092 TS Page 27 of 143...
  • Page 28 1: For reading, the R-flag must be set. The last value written to the object via the bus will be read. 2: For reading, the R-flag must be set. The last value written to the object via the bus or by the device will be read. Art. No. DS 4092 TS Page 28 of 143...
  • Page 29 1: For reading, the R-flag must be set. The last value written to the object via the bus or by the device will be read. 2: For reading, the R-flag must be set. The last value written to the object via the bus will be read. Art. No. DS 4092 TS Page 29 of 143...

  • Page 30: Objects Buzzer

    1-bit object for the reception of an alarm signalling (polarity configurable). 1: For reading, the R-flag must be set. The last value written to the object via the bus will be read. Art. No. DS 4092 TS Page 30 of 143...
  • Page 31 1-bit object for transmitting the acknowledgement of an alarm signalling (polarity configurable). 1: For reading, the R-flag must be set. The last value written to the object via the bus or by the device will be read. Art. No. DS 4092 TS Page 31 of 143...

  • Page 32: Objects Status-Led

    1-bit object for activation of the right status LED for status signalling (polarity configurable). 1: For reading, the R-flag must be set. The last value written to the object via the bus will be read. Art. No. DS 4092 TS Page 32 of 143...

  • Page 33: Object Energy Saving Mode

    The function (only activate, only deactivate, activate and deactivate) and the telegram polarity are configurable. 1: For reading, the R-flag must be set. The last value written to the object via the bus will be read. Art. No. DS 4092 TS Page 33 of 143...

  • Page 34: Extension Input Objects

    1.007 C, W, T 1...3 - output Description 1-bit object for long-time operation of a blind. 1: Each communication object can be read out. For reading, the R-flag must be set. Art. No. DS 4092 TS Page 34 of 143...
  • Page 35 1: Each communication object can be read out. For reading, the R-flag must be set. 2: For reading, the R-flag must be set. The last value written to the object via the bus will be read. Art. No. DS 4092 TS Page 35 of 143...
  • Page 36 Only for the "Dimming", "Venetian blind" and "Value transmitter" functions. 1: For reading, the R-flag must be set. The last value written to the object via the bus will be read. Art. No. DS 4092 TS Page 36 of 143...

  • Page 37: Functional Description

    Using the parameters, it is possible to determine which switching command this object is to adopt on pressing and / or on releasing (no reaction, ON, OFF, TOGGLE – toggling of the object value). No distinction is made between a brief or long press. Art. No. DS 4092 TS Page 37 of 143...

  • Page 38: Push-Button Function Dimming

    When the parameters are hidden ("Advanced parameters = deactivated"), the dimming range is set to 100 %, the stop telegram is activated and the telegram repetition is deactivated. Art. No. DS 4092 TS Page 38 of 143...

  • Page 39: Push-Button Function Venetian Blind

    If the button is kept depressed longer than T2, the device transmits no further telegram. The drive remains on until the end position is reached. Art. No. DS 4092 TS Page 39 of 143...
  • Page 40 T1 for starting the drive. No further telegram is transmitted by the device when the button is released. The drive remains on until the end position is reached. Art. No. DS 4092 TS Page 40 of 143...
  • Page 41 Otherwise, the control section of the push-button would not be able to detect if the actuator had been controlled from another control section. Art. No. DS 4092 TS Page 41 of 143...

  • Page 42: Push-Button Function Value Transmitter

    During a value adjustment, the newly adjusted values are only in the volatile RAM memory of the extension module. Therefore, the stored values are replaced by the preset values programmed in the ETS when a reset occurs (bus voltage failure or ETS programming). Art. No. DS 4092 TS Page 42 of 143...
  • Page 43 Example 1: Value adjustment with overflow? = No Figure 8: Example of value adjustment without value range overflow Example 2: Value adjustment with overflow? = Yes Figure 9: Example of value adjustment with value range overflow Art. No. DS 4092 TS Page 43 of 143...

  • Page 44: Push-Button Function Scene Extension

    An operation lasting between one and five seconds will be discarded as invalid. The parameter "Scene number specifies which of the maximum of 64 external scenes is to be activated after a button-press. Art. No. DS 4092 TS Page 44 of 143...

  • Page 45: Push-Button Function 2-Channel Operation

    This concept provides the transmission of only one channel. To indicate that a telegram has been transmitted, the device buzzer outputs a tone for approx. 250 ms in the "Telegram acknowledgement" setting. Art. No. DS 4092 TS Page 45 of 143...
  • Page 46 With this operation concept, it is also possible to signal the transmission of a telegram by the buzzer (setting "Telegram acknowledgement"). Art. No. DS 4092 TS Page 46 of 143...

  • Page 47: Rotary Knob (Rk)

    When operating the rotary knob, a switching telegram with the command according to the ETS configuration is already transmitted after the first notch (minimum rotation angle) depending on the direction of rotation (figure 14). Art. No. DS 4092 TS Page 47 of 143...
  • Page 48 The rotation angle (number of notches during a rotary movement) and the speed of rotation have no significance for the function "Switching". During a new operation, a telegram is already transmitted to the bus after the first notch (minimum rotation angle). Art. No. DS 4092 TS Page 48 of 143...

  • Page 49: Rotary Knob Function Dimming

    For this reason, it is possible to combine the rotary knob operation concept "Dimming Comfort without OFF telegram" with the push-button function "Switching", whereby a dimmer actuator can be dimmed (rotary knob movement) as well as switched (push-button operation). Art. No. DS 4092 TS Page 49 of 143...
  • Page 50 The rotation angle (number of notches during a rotary movement) and the speed of rotation is not evaluated by the device in the operation concept "Dimming without OFF telegram". Art. No. DS 4092 TS Page 50 of 143...
  • Page 51 ("Darker - OFF") if the last returned brightness value is "0" (OFF after OFF = no change). The 1-bit object "Switching" must be linked to the switching object of the actuator. Art. No. DS 4092 TS Page 51 of 143...
  • Page 52 Here, depending on the speed of rotation, relative dimming is possible by small and large step widths, thereby allowing the brightness of a lighting system to conveniently be set finely and gradually during fast rotary Art. No. DS 4092 TS Page 52 of 143...
  • Page 53 If the direction of rotation changes without interruption during an operation, no more telegrams are transmitted continuously until the rotary knob stops. The device evaluates this operation as a wrong operation. Art. No. DS 4092 TS Page 53 of 143...
  • Page 54 For this purpose, the rotary knob evaluates a brightness value feedback of the dimmer actuator. The behaviour of the device when switching off is identical to the operation concept "Dimming with OFF telegram". Art. No. DS 4092 TS Page 54 of 143...
  • Page 55 Software "Rotary sensor with extensions 10FE1x" Functional description We ask at this point that you refer to the descriptions of the two operation concepts mentioned above. Art. No. DS 4092 TS Page 55 of 143...

  • Page 56: Rotary Knob Function Venetian Blind

    If the operation of the rotary knob lasts longer and the maximum rotation angle for the slat adjustment is exceeded, the device transmits no STEP telegram. The drive remains on until the end position is reached. Art. No. DS 4092 TS Page 56 of 143...
  • Page 57 The speed of rotation is not evaluated by the device in the function "Venetian blind". During a new operation, a telegram (MOVE) is already transmitted to the bus after the first notch (minimum rotation angle). Art. No. DS 4092 TS Page 57 of 143...

  • Page 58: Rotary Knob Function 1-Byte Value Transmitter

    Figure 21: Example of the rotary knob function "1-byte value transmitter" (here: lighting control / 2 discrete values without value adjustment) Figure 22: Example of the rotary knob function "1-byte value transmitter" (here: lighting control / 1 value with value adjustment) Art. No. DS 4092 TS Page 58 of 143...
  • Page 59 The rotation angle (number of notches during a rotary movement) and the speed of rotation have no significance for this function. During a new operation, a telegram is already transmitted to the bus after the first notch (minimum rotation angle). Art. No. DS 4092 TS Page 59 of 143...
  • Page 60 "Value adjustment with overflow ?" the device stops the adjustment at this point or inserts a pause consisting of two levels and then continues the adjustment beginning with the other limit value. Art. No. DS 4092 TS Page 60 of 143...
  • Page 61 Direction of value adjustment = clockwise: upwards / anticlockwise: downwards Figure 24: Example of the function "Value transmitter 0…255" with value adjustment without overflow ("Value transmitter 0…100 %" is basically the same) Art. No. DS 4092 TS Page 61 of 143...
  • Page 62 - if the actuator has a separate 1-byte feedback object" - linked to the actuator communication object "Feedback brightness value" via a second group address. The activation of a blind or shutter actuator with communication objects for position values is Art. No. DS 4092 TS Page 62 of 143...
  • Page 63 Afterwards, no more telegrams are transmitted continuously until the rotary knob stops. The device then evaluates this operation as a wrong operation. Art. No. DS 4092 TS Page 63 of 143...
  • Page 64 (here "255" -> "250" -> "245") during a new adjustment in the other adjustment direction. An adjustment to the original starting does of a previous operation (here "247") not take place automatically here. Art. No. DS 4092 TS Page 64 of 143...
  • Page 65 "Value transmitter comfort 0…255" if this is configured to the signalling function "Telegram acknowledgement". The buzzer can signal an acknowledgement of the rotary knob for this value transmitter function if required (see page 88). Art. No. DS 4092 TS Page 65 of 143...

  • Page 66: Rotary Knob Function 2-Byte Value Transmitter

    Figure 28: Example of the rotary knob function "2-byte value transmitter" (here: temperature control / 2 discrete values without value adjustment) Figure 29: Example of the rotary knob function "2-byte value transmitter" (here: temperature control / 1 values with value adjustment) Art. No. DS 4092 TS Page 66 of 143...
  • Page 67 The rotation angle (number of notches during a rotary movement) and the speed of rotation have no significance for this function. During a new operation, a telegram is already transmitted to the bus after the first notch (minimum rotation angle). Art. No. DS 4092 TS Page 67 of 143...
  • Page 68 (not for temperature and brightness value transmitter). The parameter "Direction of value adjustment" defines whether the values, should be increased ("upwards") or reduced ("downwards") depending on the direction of rotation. Art. No. DS 4092 TS Page 68 of 143...
  • Page 69 The rotation angle for value adjustment = approx. 36° (3 notches) Step width = 10 Start on value adjustment = same as value after last adjustment Direction of value adjustment = clockwise: upwards / anticlockwise: downwards Art. No. DS 4092 TS Page 69 of 143...
  • Page 70 Software "Rotary sensor with extensions 10FE1x" Functional description Figure 31: Example of the function "Value transmitter 0…65535" with value adjustment without overflow ("Temperature value transmitter" and "Brightness value transmitter" are basically the same) Art. No. DS 4092 TS Page 70 of 143...
  • Page 71 (here "65535" -> "65525" -> "65515") after reaching the limiting values during a new adjustment in both adjustment directions. An adjustment to the original value does not take place automatically here. Art. No. DS 4092 TS Page 71 of 143...

  • Page 72: Rotary Knob Function Scene Extension

    Figure 34: Example of the operation concept of the rotary knob function "scene extension" The rotary sensor differentiates between different operations (e.g. recall scene 1, afterwards recall scene 2) based upon the time that the rotary knob stands still after a completed operation. Art. No. DS 4092 TS Page 72 of 143...
  • Page 73 "Scene extension". During a new operation, a telegram is already transmitted to the bus after the first notch (minimum rotation angle). i It is not possible to save a scene with the rotary knob function "Scene extension". Art. No. DS 4092 TS Page 73 of 143...

  • Page 74: Disabling Function For Push-Button And Rotary Knob

    The telegrams are transmitted to the bus via the communication object of the push-button. The following table shows all possible telegram reactions of the device depending on the push-button functions... Art. No. DS 4092 TS Page 74 of 143...
  • Page 75 The push-button behaves as specified by the configuration of the disabling function. The telegrams are transmitted to the bus via the communication objects of the disabling function. The buzzer then no longer signals any operations either while it is configured to "button-press display". Art. No. DS 4092 TS Page 75 of 143...
  • Page 76 The table above shows all possible telegram reactions of the device depending on the configuration of the disabling function for this setting, too. The telegrams are transmitted to the bus via the communication object of the disabling function. Art. No. DS 4092 TS Page 76 of 143...
  • Page 77 The buzzer then no longer signals any operations either while it is configured to "button-press display". i If a rotary knob operation is taking place at the time of activation / deactivation of a disabling function, the associated operating function is aborted immediately. Art. No. DS 4092 TS Page 77 of 143...

  • Page 78: Extension Inputs (E1, E2, E3)

    During an active disable, no cyclical transmissions take place via the disabled input. i The energy saving mode is never activated while extension inputs are transmitting cyclically! Art. No. DS 4092 TS Page 78 of 143...

  • Page 79: Extension Function Dimming

    If, in the ETS, a delay is set for the extension inputs after bus voltage return, the device only transmits the telegrams when the delay has elapsed. After a device reset, the "Dimming" object is always initialised with "0". Art. No. DS 4092 TS Page 79 of 143...

  • Page 80: Extension Function Venetian Blind

    If the button is kept depressed longer than T2, the input transmits no further telegram. The drive remains on until the end position is reached. Figure 36: Operation concept "long – short" Art. No. DS 4092 TS Page 80 of 143...
  • Page 81 If, in the ETS, a delay is set for the extension inputs after bus voltage return, the device only transmits the telegrams when the delay has elapsed. After a device reset, the "Short time operation" object is always initialised with "0". Art. No. DS 4092 TS Page 81 of 143...

  • Page 82: Extension Function Value Transmitter / Scene Extension

    Example of value adjustment (figure 37): - Function as dimming value transmitter - Transmit value on = Rising edge - Value configured in the ETS for rising edge = 17 - Step width = 5 Art. No. DS 4092 TS Page 82 of 143...
  • Page 83 In this case, the parameter "Only memory function ?" must be set to "Yes". Examples for a light scene extension with memory function (figure 38): 1.) Only memory function = No 2.) Only memory function = Yes Art. No. DS 4092 TS Page 83 of 143...
  • Page 84 "Transmit value on = rising and falling edge (switch)". If, in the ETS, a delay is set for the extension inputs after bus voltage return, the device only transmits the telegrams when the delay has elapsed. Art. No. DS 4092 TS Page 84 of 143...

  • Page 85: Disabling Function For Extension Inputs

    (transmit on ON, on OFF or on ON and OFF). Art. No. DS 4092 TS Page 85 of 143...

  • Page 86: Acoustic Signal Encoder

    To repeat or restart the alarm, the alarm must first be switched off here and then reactivated. Art. No. DS 4092 TS Page 86 of 143...
  • Page 87 ETS. i An active alarm signal is not stored so that this is always deactivated after a device reset or after programming with the ETS. Art. No. DS 4092 TS Page 87 of 143...
  • Page 88 The buzzer can output signal tones at different volumes. Depending on the signalling function, the volume is either preset or is configurable at up to three different volume levels in the ETS (see table below). Art. No. DS 4092 TS Page 88 of 143...
  • Page 89 The volume of the alarm message can be adjusted in the ETS if the alarm function is enabled. The programming mode is always signalled at maximum volume. Art. No. DS 4092 TS Page 89 of 143...

  • Page 90: Status-Led (Only With Application Program Of Version 1.2)

    Status LED for button-press display" parameter. In contrast to this, the signal duration of the display for a scene storage telegram (approx. 3 seconds) and the value adjustment (250 milliseconds) is permanently defined. Art. No. DS 4092 TS Page 90 of 143...
  • Page 91 Just like in the case of status signalling, an alarm function that should be activated during the energy saving mode is not recovered automatically on deactivation of the energy saving mode. Here, too, the alarm object must first be reactivated. Art. No. DS 4092 TS Page 91 of 143...

  • Page 92: Energy Saving Mode

    In all cases, the telegram polarity can be configured in the ETS. Only different polarities can ever be configured (e.g. "0" = mode inactive / "1" = mode active ) for the combined activation and deactivation. Art. No. DS 4092 TS Page 92 of 143...
  • Page 93 The configured operating functions (switching, dimming...) will not be executed thereby, however. i Programming connections to the device, broadcast telegrams or pressing of the programming button cause the energy saving mode to be deactivated automatically. Art. No. DS 4092 TS Page 93 of 143...

  • Page 94: Delivery State

    An unloaded device no longer reacts to operations. After programming in the ETS, the described behaviour of the delivery state is no longer active. The device then behaves according to the configuration. Art. No. DS 4092 TS Page 94 of 143...

  • Page 95: Parameters

    = 1 / This parameter defines the value of the object enable = 0 disabling object at which the disabling function is active. Disable = 0 / enable = 1 Art. No. DS 4092 TS Page 95 of 143...
  • Page 96 The rotary knob behaves as specified by function the configuration of the disabling function. The telegrams are transmitted to the bus via the communication objects of the disabling function. Art. No. DS 4092 TS Page 96 of 143...
  • Page 97 "PB - disabling function". The setting possibilities available for this disabling function are the same as for the push- Art. No. DS 4092 TS Page 97 of 143...
  • Page 98 Switching basic function of the push-button. Dimming Depending on this choice, the ETS Venetian blind displays different communication objects Value transmitter 1-byte and parameters. 2-byte value transmitter Scene extension 2-channel operation Art. No. DS 4092 TS Page 98 of 143...
  • Page 99 1.5 % This parameter sets the relative dimming level when the brightness is reduced. On each button-press, the 12.5 % brightness is changed at maximum by 25 % the configured step width. Art. No. DS 4092 TS Page 99 of 143...
  • Page 100 – long long – short or short Time between short- 1...4...3000 This parameter sets the time after which time and long-time the long-time operation will be evaluated on pressing the button. Art. No. DS 4092 TS Page 100 of 143...
  • Page 101 This parameter is only visible if "Value adjustment by long button-press = enabled"! Art. No. DS 4092 TS Page 101 of 143...
  • Page 102 If the push-button is configured as transmitter "2-byte value transmitter", the values to be transmitted can be formatted and Brightness value transmitted as temperature values transmitter (0 °C to 40 °C), as brightness values Art. No. DS 4092 TS Page 102 of 143...
  • Page 103 (alternating) next button-press. This parameter is only visible if "Value adjustment by long button-press = Art. No. DS 4092 TS Page 103 of 143...
  • Page 104 Thereafter, the device transmits a telegram with the value of the other range limit and continues the value adjustment in the same direction. Art. No. DS 4092 TS Page 104 of 143...
  • Page 105 (1 byte) Value transmitter 0…100 % (1-byte) Temperature value transmitter (2-byte) Command of button for This parameter defines the object value channel 1 (2) transmitted to the bus when the button is Art. No. DS 4092 TS Page 105 of 143...
  • Page 106 OFF In this configuration, the Status LED remains permanently switched off. Special case: In this setting, the Status LED displays adjustments of the transmission values in the "Value transmitter" push-button function, Art. No. DS 4092 TS Page 106 of 143...
  • Page 107 1-bit object value received. In this setting, the object value is not displayed in inverted form by the LED (Object = "0" -> LED = OFF / Object = "1" -> LED = ON). Art. No. DS 4092 TS Page 107 of 143...
  • Page 108 (ON, OFF, TOGGLE) can be transmitted TOGGLE to the bus. This parameter determines the reaction when the rotary knob is turned in anticlockwise direction. Art. No. DS 4092 TS Page 108 of 143...
  • Page 109 Dimming Comfort with OFF This operation concept functions in the telegram dimming process just like the concept "Dimming Comfort without OFF Art. No. DS 4092 TS Page 109 of 143...
  • Page 110 During a slow operation (notch by notch), the rotary knob transmits dimming commands to the actuator in a small step width. This step width is configured by this parameter. This parameter is only visible with the Art. No. DS 4092 TS Page 110 of 143...
  • Page 111 Small angles should normally be 30 notches) selected if the operation is slow or the slat travelling time is short. Likewise, 540° (1.5 times rotation, large angles of rotation are to be Art. No. DS 4092 TS Page 111 of 143...
  • Page 112 Here, depending on the speed of rotation, a value adjustment is possible by small and large step widths, thereby allowing the brightness of a lighting system to be set finely and gradually. Art. No. DS 4092 TS Page 112 of 143...
  • Page 113 0...255" and only with enabled value adjustment! Value on turning 0...100 This parameter determines the object (0...100 %) value when the rotary knob is turned in clockwise or anticlockwise direction Art. No. DS 4092 TS Page 113 of 143...
  • Page 114 Clockwise: upwards / Here, it is determined whether the adjustment anticlockwise: values should be increased ("upwards") downwards or reduced ("downwards") depending on the direction of rotation during the value Clockwise: downwards / adjustment. Art. No. DS 4092 TS Page 114 of 143...
  • Page 115 This parameter is only visible on "Function value adjustment = enabled"! With the "Value transmitter comfort 0…255" no overflow is ever possible (setting "no" is fixed). Art. No. DS 4092 TS Page 115 of 143...
  • Page 116 Function Value disabled This parameter distinguishes whether adjustment enabled just a value recall takes place and whether a value adjustment is also possible. Art. No. DS 4092 TS Page 116 of 143...
  • Page 117 It is only visible with "Function = temperature value transmitter" and only with enabled value adjustment! Brightness value on 0, 50...300...1450, 1500 This parameter determines the object turning value when the rotary knob is turned in Art. No. DS 4092 TS Page 117 of 143...
  • Page 118 ("upwards") downwards or reduced ("downwards") depending on the direction of rotation during the value Clockwise: downwards / adjustment. anticlockwise: upwards This parameter is only visible on Art. No. DS 4092 TS Page 118 of 143...
  • Page 119 The device differentiates between each operation 500 ms different operations based upon the time 1 sec that the rotary knob stands still after a 2 sec completed operation. This standstill time Art. No. DS 4092 TS Page 119 of 143...
  • Page 120 (time not yet elapsed), it then ignores the continuing movement of the rotary knob. The time for standstill detection is retriggered for each rotary knob Art. No. DS 4092 TS Page 120 of 143...
  • Page 121 Here, the LED can be switched on or off statically via the 1-bit object value received. In this setting, the object value is not displayed in inverted form by the LED Art. No. DS 4092 TS Page 121 of 143...
  • Page 122 (via object) via a communication object of its own. During the status signalling, it is possible pulsating status signalling to distinguish whether the buzzer Art. No. DS 4092 TS Page 122 of 143...
  • Page 123 ( loud <-> quiet) is possible. The volume can be set at up 5 different levels. A setting between "level 1 (quiet)" and Art. No. DS 4092 TS Page 123 of 143...
  • Page 124 "Alarm" "0" = Alarm / state, the buzzer outputs the alarm tone. "1" = Resetting alarm The alarm function then overrides acoustic signalling with lower priority. Art. No. DS 4092 TS Page 124 of 143...
  • Page 125 Acknowledge alarm ON telegram This parameter sets the polarity of the signalling by OFF telegram object "Acknowledge alarm". This parameter presetting depends on the selected polarity of the object "Switch alarm". Art. No. DS 4092 TS Page 125 of 143...

  • Page 126: Extension Inputs Parameter

    The basic function of the appropriate Switching extension input is defined here. Dimming In the "No function" setting, the Venetian blind extension input is deactivated. Value transmitter The following parameters are visible for the function "Switching"... Art. No. DS 4092 TS Page 126 of 143...
  • Page 127 (contact closed at the input = telegram as with rising edge; contact open at input = telegram as with falling edge). If, in this case, the edge command dependent on the current Art. No. DS 4092 TS Page 127 of 143...
  • Page 128 If, in the ETS, a delay is set for the extension inputs after bus voltage return, the device only transmits the telegrams when the delay has elapsed. No reaction Art. No. DS 4092 TS Page 128 of 143...
  • Page 129 The following parameters are visible for the function "Venetian Blind"... Command on rising This parameter specifies the reaction to edge a rising edge at the input. No function The input is deactivated. Art. No. DS 4092 TS Page 129 of 143...
  • Page 130 STEP. This function is used for slat adjustment. long - short A MOVE is transmitted when there is a rising edge at the input and the "slat Art. No. DS 4092 TS Page 130 of 143...
  • Page 131 Only visible with "Dimming value transmitter" and "Transmit value on = rising edge (pushbutton as NO contact)" and "Transmit value on = rising and falling edge (switch)". Art. No. DS 4092 TS Page 131 of 143...
  • Page 132 Only visible with "Brightness value transmitter" and "Transmit value on = rising edge (pushbutton as NO contact)" and "Transmit value on = rising and falling edge (switch)". Art. No. DS 4092 TS Page 132 of 143...
  • Page 133 With the first adjustment after commissioning, the value programmed by the ETS is increased cyclically by the Art. No. DS 4092 TS Page 133 of 143...
  • Page 134 = 0 / enable = 1 Behaviour at the No reaction With an active disable, the first switching beginning of the object is disabled. This parameter specifies the command transmitted via Art. No. DS 4092 TS Page 134 of 143...
  • Page 135 "TOGGLE" switches over the current object value. In the "Transmit current input status" setting, the device evaluates the current static signal status of the input and, according to this, Art. No. DS 4092 TS Page 135 of 143...
  • Page 136 Polarity of the disabling disable = 1 / This parameter defines the polarity of object enable = 0 the disabling object. disable = 0 / enable = 1 Art. No. DS 4092 TS Page 136 of 143...
  • Page 137 Reaction as falling edge In the "Transmit current input status" setting, the device evaluates the static Transmit current input signal status of the input and, according status to this, transmits the appropriately Art. No. DS 4092 TS Page 137 of 143...
  • Page 138 Sets the cycle time minutes. Seconds (0...59) 0...30...59 Sets the cycle time seconds. Cyclical transmission Here, it is possible to specify whether Switching object 1.2 ? cyclical transmission should take place Art. No. DS 4092 TS Page 138 of 143...
  • Page 139 Hours (0...23) input, then the cycle time can be configured here. Sets the cycle time hours. Minutes (0...59) 0...59 Sets the cycle time minutes. Seconds (0...59) 0...30...59 Sets the cycle time seconds. Art. No. DS 4092 TS Page 139 of 143...

  • Page 140: Energy Saving Mode Parameter

    This parameter defines the telegram saving mode" "1" = mode active polarity for the object for activating or deactivating the energy saving mode. "0" = mode active / The options and thus standard setting of Art. No. DS 4092 TS Page 140 of 143...
  • Page 141 Seconds (0...59) 0...59 Setting the delay time seconds. This parameter is only visible when the energy saving mode is to be activated automatically by time. Art. No. DS 4092 TS Page 141 of 143...

  • Page 142: Appendix

    92 ETS ............9 ETS project design......... 15 ETS search paths........12 Piezo signal transmitter......86 product database........15 programming mode.........87 Status LEDs..........90 Switching..........37 value transmitter........42 Venetian blind......... 39 Art. No. DS 4092 TS Page 142 of 143...
  • Page 143   Appendix ALBRECHT JUNG GMBH & CO. KG Volmestraße 1 58579 Schalksmühle Telefon: +49.23 55.8 06-0 Telefax: +49.23 55.8 06-2 04 kundencenter@jung.de www.jung.de Service Center Kupferstr. 17-19 44532 Lünen Germany Art. No. DS 4092 TS Page 143 of 143...

Table of Contents