Table of Contents
Advertisement
Chapter 10
Upgrading New Firmware Configuration
Chapter 10
Upgrading New Firmware Configuration
To upgrade your management firmware, please follow the listed procedure.
1.
Power OFF switch.
2.
Set the DIP Switch 1 and 2 to UP position (OFF).
3.
Power ON switch.
4.
Then set DIP Switch 1 to DOWN position (ON) immediately.
5.
From the PC, startup web browser and enter http://192.168.100.128.
NOTE
Other IP addresses are not supported.
In firmware upgrade mode, Compex SXP2226WM will default to 192.168.100.128.
The Upgrade Firmware page will appear.
6.
Click the browser button to locate the firmware in the computer.
7.
Or type in the drive, path and firmware filename.
8.
Then click "Upgrade" button.
When firmware is uploaded and written successfully, a success message will display.
Otherwise, a failed message will appear.
39
Figure 10.1a Firmware Upgrade Interface
Advertisement
Table of Contents
