Chapter 5
Configure Compex SXP2226WM using Web Interface
5.3.1
Examples on Port Trunking
Control station
From Figure 5.3b, three Compex SXP2226WM units are used to perform
the trunking ability. For Units 1 and 3, Port #1 and #2 are selected as
trunking ports, whereas for SXP2226WM Unit 2, Port #1, #2, #9 and #10
are being selected. Port #12 of Unit 1 is set as a CPU port. After selecting
the respective trunking group for individual switches, all SXP2226WM
units combined the bandwidth to increase the network speed.
24
SXP2226WM Unit 1
SXP2226WM
Unit 2
SXP2226WM
Unit 3
Figure 5.3b
Physical Set up of Port Trunking
Port #12 is set as
CPU port