Chapter 9 Clearing Password And Restoring Default Ip Address - Compex SXP2226WM User Manual

Chapter 9 Clearing Password and Restoring Default IP Address
Chapter 9 Clearing Password and Restoring Default IP Address
If the password or IP address of Compex SXP2226WM is lost, or you probably wish to upgrade
your management firmware, you can easily operate the DIP switch located in the front panel.
There are 2 positions on the DIP switch which can compose to 4 states as shown in the table.
CAUTION
To enable any of the functions listed above, you should set your Compex
SXP2226WM to State D while the switch is power-up or rebooted. If State D is
not set while the power is turned on, these functions will not be activated.
A
B
C
(Default)
D
37
Status DIP Switch 1 DIP Switch 2
OFF
OFF
ON
ON
OFF
ON
OFF
ON