Table of Contents
Advertisement
Chapter 5
Configure Compex SXP2226WM using Web Interface
From the example shown in Figure 5.4b, Port #23 is set as a mirror port to
monitor the traffic of Port #1. Data packets that are received at Port #1 will
send a duplicate packet to Port #23. In this way, the traffic of Port #1 can be
monitored through Port #23 (mirror port) without interfering the traffic in
Port #1.
To configure Port Mirroring,
1.
2.
3.
27
Figure 5.4c
Setting Port #23 as a mirror port
Select Mirror Receiving Packet from the Mirror Control option.
Select Port 01 as the port which needs the mirror port to monitor.
Next choose Port 23 to be the mirror port and click on the "Apply"
button.
Advertisement
Table of Contents
