Table of Contents
Advertisement
Chapter 1
Product Overview
•
Virtual LAN (VLAN)
Compex SXP2226WM can support up to 24 port-based VLANs and static
configuration of 802.1Q VLAN. It allows network administrator to separate the
network into a few segments by defining which port belong to which VLAN
segment. This can effectively control broadcast and multi-cast packet flooding
the network. This not only improves the network performance, but also provides
security between workgroups.
•
Port Mirroring
This function allows you to set up a 'mirror' port on any specified port/s or
VLAN, such that you can monitor the traffics of the monitored port/s or VLAN
without intervening them. In effect, the traffics on the monitored port/s or VLAN
are replicated on the mirror port, such that you can use a protocol analyzer to
analyze the traffic for specific problem.
•
10Base-T/100Base-TX/1000Base-T N-Way Auto-Negotiation
In Compex SXP2226WM, all ports use the N-Way Auto-Negotiation mechanism
to detect the speed of the attached network adapter. This feature gives users the
freedom and convenience of connecting the switch to a 10Base-T, 100Base-TX
or 1000Base-T network without further manual configuration and setup.
•
10/100/1000 Mbps Switching function
A cost-effective 1000Mbps, 100Mbps and 10Mbps switching function in a single
unit. Compex SXP2226WM divides a network into smaller shared groups,
eliminating unnecessary traffic, multiplying available bandwidth, and relieving
congestion on server paths.
•
10/100/1000 Mbps Integration
24 high-speed ports permit Ethernet workgroups to communicate with Fast
Ethernet users in a single integrated network, and share servers connected to the
dedicated 1000Mbps ports. Port expansion is easy by connecting several
switches and hubs together through uplink port.
2
Advertisement
Table of Contents
