Ø Installation Of Ps2208A; Desktop Installation; Wall Installation - Compex PS2208A Quick Install Manual

♦
LED Indicators
♦
Dynamic memory
sharing In/Out buffer:
♦
Forwarding Method:
♦
Number of MAC
Addresses:
♦
Dynamic Addresses
Learning/Filtering:
♦
Power Supply:
♦
Environment
Requirements:
♦
Physical Dimensions:
♦
Weight:
♦
Safety:
Ø Installation of PS2208A
PS2208A can be installed on a flat surface (desktop) or mounted on a wall. Follow
the steps below for proper installation.

Desktop Installation:

1. Unpack the hub.
2. Choose a location near the devices to be connected and close to an electrical outlet.
3. Set the hub on a desktop or any other clean, smooth, level and sturdy surface.
Make sure there is enough clearance around the unit to allow attachment of
network cables, power adapter and allow air circulation.
4. Connect the power adapter to the hub. The POWER LED and PORT LED for
each connected port should light up.
5. The hub is ready to operate.

Wall Installation:

1. Measure the distance between the mounting holes at the bottom of the hub and
mark the wall to match the location of the mounting holes on the hub.
3 Compex 8 Port Dual Speed Fast Ethernet
LED indicators are provided for status monitoring.
These include LEDs for system power, port speed,
traffic activity and link.
1M Bytes
Store-and-Forward.
4K MAC Addresses.
Yes.
External 7.5VDC, 2.1A.
Temperature: Operating: 0°C to 40°C
Storage: -5°C to 60°C
Humidity: Operating: 10% to 90%(non-condensing)
148x 90 x 25mm (L x W x H)
About 0.20 kg
UL, CSA, TUV/GS.
Switch (PS2208A)
English