Service; Cleaning And Maintenance; Equipment Disposal - European Regulations; Symbols And Conventions - Labnet D1301 User Manual

8.1 Service

Should you have a question about the operation of the
contact Corning at 800-492-1110. Do not send in a unit for service without first calling to obtain
a repair authorization number. Should the unit require return to Corning for service, it should be
properly packed to avoid damage. Any damage resulting from improper packaging shall be the
responsibility of the user.

9.0 Cleaning and Maintenance

Make sure that the dry bath and block are cool and the power cord is disconnected before performing
any cleaning or maintenance. Repair or maintenance should only be performed by an authorized
service technician.
The dry bath may be cleaned with a moist cloth containing a mild soap solution. Do not immerse the
dry bath in water or any liquid.
The blocks may also be cleaned in a mild soapy solution. Be sure that all items have thoroughly dried
before attempting to connect the cord or use the unit.
Spills: In the event liquid is accidentally spilled into the bath or well area, disconnect the plug from the
outlet and turn the unit upside down to minimize liquid contact with the internal components. Remove
the bottom cover and inspect to assure liquid has not contacted heater elements, electronic controls,
or connectors. Have qualified service technician clean the unit and replace any damaged parts.
Appendix A

Equipment Disposal - European Regulations

According to Directive 2012/19/EU of the European Parliament and of the Council of 4
July 2012 on waste electrical and electronic equipment (WEEE), Prism R Refrigerated
Centrifuge is marked with the crossed-out wheeled bin and must not be disposed of with
domestic waste.
Consequently, the buyer shall follow the instructions for reuse and recycling of waste electronic
and electrical equipment (WEEE) provided with the products and available at the following link:
www.corning.com/weee

Symbols and Conventions

The following chart is an illustrated glossary of the symbols that may be used in
this manual or on the product.
6 | AccuBlock Digital Dry Bath
The electrical warning indicates the presence of a potential hazard
which could result in electrical shock.
ATTENTION: Hot Surface!
Indicates disposal instruction.
DO NOT throw this unit into a municipal trash bin when this unit has
reached the end of its lifetime. To ensure utmost protection of the
global environment and minimize pollution, please recycle this unit.
Digital Dry Bath
or if service is required,