Subscribe to Our Youtube Channel
Related Manuals for Labnet AccuPlate D0300
Summary of Contents for Labnet AccuPlate D0300
- Page 1 AccuPlate™ Analog Hotplate, Stirrers, Hot Plate Stirrer User Manual D0300 D0300-230V D0310 D0310-230V D0320 D0320-230V LIT M03001 October 2014 Version 1.0...
-
Page 2: Table Of Contents
About This Manual This manual is designed to assist you in optimal usage of your new hot plate, stirrer or hotplate stirrer. Product Voltages Hot plates, stirrers, and stirrer/hot plates are available in different voltages. Before initial use, check that the unit you received is the correct voltage for your location. Warranty Registration Filling out and mailing the attached Warranty Registration Card or submitting this infor- mation online at http://www.labnetinternational.com/product-warranty-registration will... -
Page 3: Safety Information
Safety Information This instruction manual contains important operating and maintenance instructions which must be read, understood, and followed by the product user. Failure to use this product ac- cording to this instruction manual may degrade or defeat the protection normally provided by this product. -
Page 4: Operating Conditions
• Do not use this product with a metal vessel. Operating Conditions Your Labnet hot plate, stirrer or stirring hot plate is a general purpose heating and/or stirring plate designed for laboratory procedures requiring precise control of temperature and/or stirring speed. -
Page 5: Product Controls And Indicators
Product Controls and Indicators Front side Ceramic Coated Top Plate Temperature On Indicator Lamp Hot Top Indicator Lamp Speed On Indicator Lamp Power Switch Heat Control Stir Control Knob Knob Rear Side Support Rod Power Inlet with Holder fuse holder Data Label... -
Page 6: Instructions For Use (Stirring And Heating)
Instructions for Use 1) Turn temperature and speed to zero before plugging in. And connect the Main power cord topower supply. Place your container or heating bath with the magnetic stirrer bar. Stirrer bar should be placed in center of hot plate 2) Turn Power Switch ON. -
Page 7: Product Repair
• Inspect the top plate for damage during cleaning. • Discontinue product use if the top plate is chipped, etched, or shows excessive scratching. • Contact your Labnet Distributor or Labnet Customer Service for top plate replacement. General • It is important to keep this product dry and clean. -
Page 8: Technical Specifications
• If liquid or wet solid material gets inside the product, immediately disconnect power to the product and discontinue use. Contact Labnet for additional instructions regarding interior spills. • Do not disassemble, modify, revise or repair this product. This may be a cause a malfunction,electrical fire. - Page 9 By doing so, you will help to conserve natural and environmental resources and you will ensure that your equipment is recycled in a manner that protects human health. Thank you Labnet International, Inc,. 31 Mayfield Ave., Edison, NJ 08837 (P) +732-417-0700 (F) +732-417-1750 Email: labnetinfo@corning.com...
-
Page 10: Certifications
Labnet International, Inc,., 31 Mayfield Ave., Edison, NJ 08837 USA Labnet International declares that the devices described below are in conformity with the EC directives listed. In the event of unauthorized modification of any of the devices listed below, this declaration becomes invalid. -
Page 11: Warranty Statement
This warranty gives you specific legal rights. You may have other rights which vary from state to state. No individual may accept for, or on behalf of Labnet International, Inc., any other obligation of liability, or extend the period of this warranty.
Need help?
Do you have a question about the AccuPlate D0300 and is the answer not in the manual?
Questions and answers