Advertisement
Table of Contents
WARNING: READ THIS FIRST
IF YOU ARE ATTEMPTING TO ASSEMBLE THIS
TRESPA TOP PLEASE MAKE SURE YOU ARE
USING THE CORRECT SCREW.
CORRECT / FLAT TIP
USING THE INCORRECT SCREW WILL CAUSE
PERMANENT DAMAGE TO THIS TOP
SMITH SYSTEM WILL NOT BE LIABLE FOR ISSUES
RESULTING FROM USING THE INCORRECT SCREW
IF INCORRECT SCREWS WERE INCLUDED WITH THIS TOP
OR YOU CANNOT LOCATE CORRECT HARDWARE,
CONTACT SMITH SYSTEM CUSTOMER SERVICE AT THE
NUMBER BELOW.
Form #179785
If you have damaged or missing components
please contact customer service.
800-328-1061
www.smithsystem.com
INCORRECT / POINTED TIP
.
Advertisement
Table of Contents
Related Manuals for SMITH SYSTEM Trespa Top 11265
Summary of Contents for SMITH SYSTEM Trespa Top 11265
- Page 1 INCORRECT / POINTED TIP USING THE INCORRECT SCREW WILL CAUSE PERMANENT DAMAGE TO THIS TOP SMITH SYSTEM WILL NOT BE LIABLE FOR ISSUES RESULTING FROM USING THE INCORRECT SCREW IF INCORRECT SCREWS WERE INCLUDED WITH THIS TOP OR YOU CANNOT LOCATE CORRECT HARDWARE, CONTACT SMITH SYSTEM CUSTOMER SERVICE AT THE NUMBER BELOW.
- Page 2 Trespa Top Quick Installation Guide Required for Installation Instructions Step 1: Following the Instructions included with the desk frame, loosely assemble frame (finger tight). Step 2: Flip Trespa Top over on a smooth, clean surface with the bottom facing up. #10 x 7/16”...
Need help?
Do you have a question about the Trespa Top 11265 and is the answer not in the manual?
Questions and answers