Setting the units of measurement
This function allows changing the units of
measurement of the displayed values.
To gain access to this function display the "setting"
menu page 80, use buttons (1) or (2) to select the "SET
UNITS" function and press the reset button (4) to shift
to next page.
Use buttons (1) or (2) to select the value for which you
wish to change the unit of measurement and press
the reset button (4) again.
Instrument panel displays the values that can be
changed; use buttons (1) or (2) to select the value you
wish to change, and press the reset button (4) again.
110
MENU
RIDING MODE
RPM
MENU 2
PIN CODE
BACK LIGHT
LAP
4
SETTING UNITS
SPEED
TEMPERATURE
1
4
2
BATTERY
ABS
CLOCK
DDA
SET UNITS
EXIT
CONSUMPTION
EXIT
Fig. 60