Summary of Contents for Aimco AcraDyne 1000 Series
Page 1
AcraDyne 1000 & 2000 Series Pistol Nutrunners Operations Manual PO Box 16460, Portland OR 97292-0460 • 800-852-1368 • Fax 800-582-9015 www.aimco-global.com...
Page 2
Introduction Thank you for purchasing this AcraDyne DC electric assembly tool, one of the lightest and fastest DC electric assembly tools on the market. When used with the AcraDyne iEC tool controller, this tool will provide excellent productivity, ergonomics, reliability and quality on a wide range of industrial assembly applications. Safety Information SAVE THESE INSTRUCTIONS WORK AREA...
Page 3
OPERATIONS Square / Hex Drive Multi Function Button Trigger Button Cable Connection 1. Connect tool cable to the iEC controller and the tool: underway. Pressing the MFB will cause the tool to flash yel- The tool cable has curved alignment tabs and slots low and red LED lights.
Page 4
1000 SERIES PISTOL NUTRUNNERS PAGE HEADER HERE Assembly for: AEP4A12003A, AEP4A12006A, AEP4A12011A, AEP4A12014A, AEP4A12018A, AEP4A12022A 1/16 HEX 1.4 Nm (12 IN-LBS) LOCTITE 242 BLUE ASSEMBLE LED SCREW LOCTITE 242 (BLUE) THRU GROUND TERMINAL TIGHTEN TO GEAR CASE 40Nm (30 FT-LBS.) LOCTITE 242 (BLUE) ASSEMBLE OUTPUT ASSEMBLY TO GEAR CASE...
Page 5
2000 SERIES PISTOL NUTRUNNERS PAGE HEADER HERE Assembly for: AEP4A22020A, AEP4A22025A, AEP4A22030A, ASSEMBLE LED SCREW THRU GROUND TERMINAL APPLY LOCTITE #242 BLUE 1/16" HEX ASSEMBLE MOTOR 1.4Nm (12 IN.LBS.) COUPLER AS SHOWN SEE NOTE 1 30.2mm (1 3/16") HEX APPLY LOCTITE #242 BLUE 40Nm (30 FT.LBS.) TIGHTEN TO GEAR CASE TO 40Nm (30 FT.LBS.)
Page 6
Specifications Environmental • Operating Temperature: 0°C to 32°C • Storage Temperature: 0°C to 65°C • Humidity: 5% to 90% RH, Non-Condensing, for temperatures 0°C to 40°C 5% to 60% RH, Non-Condensing, for temperatures 0°C to 65°C • Maximum Altitude of Operation: 3000m •...
Need help?
Do you have a question about the AcraDyne 1000 Series and is the answer not in the manual?
Questions and answers