More Ap Edit - ZyXEL Communications EMG2881-T20A User Manual

You can configure up to four SSIDs to enable multiple BSSs (Basic Service Sets) on the EMG2881-T20A. This
allows you to use one access point to provide several BSSs simultaneously. You can then assign varying
security types to different SSIDs. Wireless clients can use different SSIDs to associate with the same access
point.
Click Configuration > Wireless > More AP. The following screen displays.
Figure 30 Configuration > Wireless > More AP
The following table describes the labels in this screen.
Table 23 Configuration > Wireless > More AP
LABEL
Band
#
Status
SSID
Security
Remaining Time
Edit

7.4.1 More AP Edit

Use this screen to edit an SSID profile. Click the Edit icon next to an SSID in the More AP screen. The
following screen displays.
Chapter 7 Wireless LAN
DESCRIPTION
Use 2.4GHz or 5GHz to set up the EMG2881-T20A's guest WiFi network.
This is the index number of each SSID profile.
This shows whether the SSID profile is active (a yellow bulb) or not (a gray bulb).
An SSID profile is the set of parameters relating to one of the EMG2881-T20A's BSSs. The SSID
(Service Set IDentifier) identifies the Service Set with which a wireless device is associated.
This field displays the name of the wireless profile on the network. When a wireless client scans
for an AP to associate with, this is the name that is broadcast and seen in the wireless client
utility.
This field indicates the security mode of the SSID profile.
If the user is currently not permitted to access the Internet, you can click Set to allow access for
a specified period of time. A screen then displays allowing you to set how long (in hours) the
user is allowed to access the Internet.
This field displays the amount of Internet access time that remains for each user before the
EMG2881-T20A blocks the user from accessing the Internet.
0:0:0 means there is no extra Internet access time.
Click the Edit icon to configure the SSID profile.
EMG2881-T20A User's Guide
62