VERITAS NetBackup 5330 Hardware Service Procedure page 8

Raid or expansion canister replacement

Hide thumbs Also See for NetBackup 5330:

Do not remove both canisters from the storage shelf at the same time. One canister must be

functioning at all times.

Unlock and pull the levers forward to release the canister.

10 Pull the canister out of the chassis.

While removing the canister, you might notice an increase in fan speed. The fan speed returns

to normal after you have replaced the canister.

11 Refer to the next section to remove the battery from the RAID canister.

12 Refer to the last section to replace the Expansion canister.

13 Move quickly to install the new canister within 15 minutes.

To remove the battery from the RAID canister

Locate the air blocker.

Fold the air blocker inward at right angles so it is ready to insert into the open canister slot.

Insert the air blocker into the open slot to make sure that correct airflow is maintained throughout

the storage shelf.

HSP 133 RAID or Expansion canister replacement