VERITAS NetBackup 5330 Hardware Service Procedure page 11

• Use the SFPs that you removed before you removed the original RAID canister.
• Insert an SFP into an FC port. You should not need to use the handle.
4 On the RAID or Expansion canisters, reconnect all of the cables that were removed from the
original canister.
5 Bring the replacement RAID canister online. If the canister does not come online, contact Veritas
Technical Support.
6 Look at the Service Action Required LEDs and Service Action Allowed LEDs.
• If all of the Service Action Required LEDs are off, the procedure is completed.
• If any of the storage shelf Service Action Required LEDs are on, or if the RAID canister Service
Action Required LED is on – Check that the canister has been installed correctly and that all
of the cables are installed correctly. Reinstall the canister, if necessary.
7 Look at the seven segment displays on the new canister.
• The display on the RAID canister should read "99."
Note: It can take up to 10 minutes for the canister to become operational. If after 10 minutes,
the display is a number other than 99, you should escalate the issue.
• The display on the Expansion canister should read "00."
Note: It can take up to two minutes for the Expansion canister to become operational. If after
two minutes, the display is a number other than 00, you should escalate the issue.
HSP 133 RAID or Expansion canister replacement
11