Download Print this page

VERITAS NetBackup 5330 Hardware Service Procedure page 7

Raid or expansion canister replacement
Hide thumbs Also See for NetBackup 5330:

Advertisement

Use the handle to pull the SFP straight out from the port.
Keep all SFPs in a safe location. You will re-install them in the new RAID canister.
8
Locate the lever(s) on the canister you need to remove.
The Primary Storage Shelf has one lever with an orange tab and one lever without a tab, per
canister. The lever with the orange tab overlaps the top of the other lever.
NetBackup 5330 Primary Storage Shelf RAID Canister Levers (the lever with the orange tab is
shown)
The Expansion Storage Shelf has two levers with orange tabs per canister.
NetBackup 5330 Expansion Storage Shelf Expansion Canister Levers (two per canister)
Warning: If you perform this procedure with the power turned on, you must complete it within 15
minutes to prevent the possibility of overheating the equipment.
HSP 133 RAID or Expansion canister replacement
7

Advertisement

loading