Battery Charging; Display - Adam ACBplus Series Manual

 The scale comes with a stainless steel platform, packed
separately.
 Place the platform in the receptacles on the top cover.
 Do not press with excessive force- it could damage the load
cell inside.
 Level the scale by adjusting the four feet. The scale should
be adjusted such that the bubble in the spirit level is in the
centre of the level and the scale is supported by all four feet.
 Turn the power on by pressing the [On/Off] switch.
 The unit will display the model number and the software
revision number for a while and then will count down
performing a self-test.
 When ready the display will show zero along with the
weighing unit selected during the last operation.
3.3

BATTERY CHARGING

 The scales can be operated from the internal rechargeable
battery or using an A.C. Adapter. The battery life is
approximately 24 hours depending on the usage of the
backlight.
 The display will show an indication when the battery needs to
be charged. To charge the battery, plug in the AC adapter at
the back of the scale and attach it to the main power supply.
The charging indicator at the left top corner of the LCD will
be on.
3.4

DISPLAY

© Adam Equipment Company 2004
5