Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Adam WBW 2L
Summary of Contents for Adam WBW 2L
- Page 1 Adam Equipment WBW L Software revision: U 4.01 © Adam Equipment Company 2018...
-
Page 2: Table Of Contents
SCALE PARAMETERS ..................14 14.0 ERROR CODES ....................15 14.0 REPLACEMENT PARTS AND ACCESSORIES ........... 16 15.0 SERVICE INFORMATION ..................16 16.0 WARRANTY INFORMATION ................17 © Adam Equipment Company 2018... -
Page 3: Introduction
All scales have sealed keypads with colour coded membrane switches and the displays are clear red LED type. (0,56 inch LED) The scales can be supplied with an optional rear display. The scales include automatic zero tracking, audible alarm for pre-set weights and semi-automatic tare. © Adam Equipment Company 2018... -
Page 4: Specifications
18 lb:0.0 oz 35 lb: 0.0 oz Capacity Readability 0.01 oz 0.02 oz 0.1 oz 0.1 oz Repeatability 0.01 oz 0.02 oz 0.1 oz 0.1 oz (S.D.) Linearity (±) 0.02 oz 0.04 oz 0.2 oz 0.2 oz © Adam Equipment Company 2018... - Page 5 IP 65 Sealed ABS Plastic housing with Stainless Steel pan Pan Size 210 x 173 mm Overall Dimensions 231 x 265 x 153 mm (wxdxh) Net Weight 3.3 kg / 7.26 lb Applications Weighing Scales Functions Weighing, Check weighing © Adam Equipment Company 2018...
-
Page 6: Installation
Avoid air movement such as from fans or opening doors. Do not place near open windows or air- conditioning vents. Keep the scales clean. Do not stack material on the scales when they are not in use. © Adam Equipment Company 2018... -
Page 7: Setting Up
At the end of the self-test it will display zero weight, if the zero condition has been achieved and the weighing unit that was in use last. A stable and zero symbol indicators are also displayed. © Adam Equipment Company 2018... -
Page 8: Keypad
To set a value when required, use the keys as given below- - [Limit] key to increase the flashing digit, - [Unit] key to move to the next digit and - [Tare] key to accept the value © Adam Equipment Company 2018... -
Page 9: Display
When the battery needs charging a symbol on the display area will turn on. The battery should be charged when the symbol is on. The scale will still operate for about 20 minutes after which it will automatically switch off to protect the battery. © Adam Equipment Company 2018... -
Page 10: Display Brightness
12.2. AUTO POWER OFF The auto power off can be set by the user to disable the feature or to a pre-set time interval. See setting of the parameter “S3 AoF “ in section 12.2. © Adam Equipment Company 2018... -
Page 11: Operations
The display will show the weight and the unit of weight currently in use. To change the weighing unit press the [Unit] key. The available weighing units are the ones that are enabled by the user in the parameters section. See section 12.2. © Adam Equipment Company 2018... -
Page 12: Check-Weighing
NOTE: The limits are displayed in the weighing unit in use. The decimal point is fixed at the position that is used for the current weighing unit. If the weighing unit is pounds:ounces, the limits are entered in pounds and decimal parts of pounds. i.e. 6,0125 lb. © Adam Equipment Company 2018... -
Page 13: Limits Stored In Memory
Press the [Tare] key and wait until the stability light is shown; then press [Tare] key again. Display will show ‘’Pass’’ or ‘’Fail’’, then return to the weighing mode. Remove the calibration weight when the calibration is complete. © Adam Equipment Company 2018... -
Page 14: Parameter Setting
“donE”. If the old parameter is other than “0000”, enter the old one when “P _ _ _ _” is displayed and then enter the new password twice when asked. When complete, it will display “donE”. © Adam Equipment Company 2018... -
Page 15: Scale Parameters
SLP 1 SLP 5 SLP 10 S4 diS Display all weights or only when stable StAb S5 Fi SLow Filter setting to slow, normal or fast FASt S6 AZr 0.5d 0.5d Auto Zero range, 1.0d 1.5d © Adam Equipment Company 2018... -
Page 16: Error Codes
FAIL H or Calibration error Improper calibration (should be within +10% of the factory calibration). The old calibration FAIL L data will be retained until the calibration process is complete. © Adam Equipment Company 2018... -
Page 17: Replacement Parts And Accessories
14.0 REPLACEMENT PARTS AND ACCESSORIES If you need to order any spare parts and accessories, contact your supplier or Adam Equipment. A partial list of such items is as follows- Power Supply Module Replacement Battery Stainless Steel Pan 15.0 SERVICE INFORMATION... -
Page 18: Warranty Information
16.0 WARRANTY INFORMATION Adam Equipment offers Limited Warranty (Parts and Labour) for the components failed due to defects in materials or workmanship. Warranty starts from the date of delivery. During the warranty period, should any repairs be necessary, the purchaser must inform its supplier or Adam Equipment Company. - Page 19 WARNING: This product includes a sealed lead-acid battery which contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Adam Equipment products have been tested with, and are always supplied with mains power adaptors which meet all legal requirements for the intended country or region of operation, including electrical safety, interference and energy efficiency.
- Page 20 © Copyright by Adam Equipment Co. All rights reserved. No part of this publication may be reprinted or translated in any form or by any means without the prior permission of Adam Equipment. Adam Equipment reserves the right to make changes to the technology, features, specifications and design of the equipment without notice.
Need help?
Do you have a question about the WBW 2L and is the answer not in the manual?
Questions and answers