Related Manuals for Adam ACBplus Series
Summary of Contents for Adam ACBplus Series
- Page 1 Adam Equipment ACBplus SERIES (P.N. 4278, Rev. B3, August 2004) Software rev.: 1.13 for standard models 1.9 for ACBplus-1000 and 5000 and 2.1H for ACBplus-600H © Adam Equipment Company 2004...
- Page 2 © Adam Equipment Company 2004...
-
Page 3: Table Of Contents
Setting the print mode ................13 5.3.3 Setting the baud rate ................13 5.3.4 Parity settings ..................15 SETTING OF AUTO-SWITCH-OFF ............15 TECHNICAL PARAMETERS ..............15 CALIBRATION ....................17 COMMUNICATION WITH A COMPUTER/PRINTER ........17 ERROR MESSAGES ..................18 © Adam Equipment Company 2004... -
Page 4: Introduction
1.0 INTRODUCTION The ACBplus series of scales are simple and easy to use. The scales can be operated with an A.C. adapter or using an internal rechargeable battery. The weighing process is fast and accurate, making it suitable for the general purpose weighing applications, parts counting, percentage weighing functions, etc. -
Page 5: Specifications
16mm high 6 digits LCD With auto backlight and loading bar graph Scale Housing ABS Plastic with Stainless Steel platform Overall Dimensions (wxdxh) 195 x 240 x 70mm (7.7” x 9.5” X 2.8”) Net Weight 1.5 kg (3.3 lb.) © Adam Equipment Company 2004... -
Page 6: Installation
Do not stack material on the scale when not in use. Protect the scale from extreme temperatures, vibration and dust. SETTING UP THE SCALE Remove the Shipping Protection screw from the bottom of the base. © Adam Equipment Company 2004... -
Page 7: Battery Charging
To charge the battery, plug in the AC adapter at the back of the scale and attach it to the main power supply. The charging indicator at the left top corner of the LCD will be on. DISPLAY © Adam Equipment Company 2004... -
Page 8: Key Descriptions
RS-232 (A USB normal operation when the scale is interface will be available shortly). in a parameter setting mode. It also adds the value to the accumulated memory if the accumulation function is not automatic. © Adam Equipment Company 2004... -
Page 9: Operation
The “O” indicator will also be on because the platform is back to the same condition as it was when the [Zero] key was last pressed. To cancel the tare value, press [Tare] again. © Adam Equipment Company 2004... -
Page 10: Weighing
102.13%, as one scale division (0.5g) increase to 24.0g will be equivalent to a 2.13% increase. Pressing the [%] key again will return the scale to normal weighing. © Adam Equipment Company 2004... -
Page 11: Parts Counting
[Print] key is pressed and the weight is stable. The display will show "ACC 1" followed by the total value in the memory for 2 seconds before returning to displaying the weight of the item on the scale. © Adam Equipment Company 2004... -
Page 12: Parameters
Press [Mode] to change the settings of a particular parameter. For example, to enable the weighing unit pounds change the setting to “on” by pressing [Mode] now. Use the [Print] key to leave a parameter unchanged. © Adam Equipment Company 2004... -
Page 13: Selecting The Units
To view the weight in other units (which are enabled), press [Mode]. The following table shows different units which are available to the user and the conversion factors for each. © Adam Equipment Company 2004... -
Page 14: Setting Of The Backlight
When “F2 EL” is displayed, press the [Zero] key to view the current setting for the backlight. Press [Mode] to scroll through other settings. Press [Zero] to store a particular setting. Use the [Print] key to leave a parameter unchanged. © Adam Equipment Company 2004... -
Page 15: Setting The Printing Parameters
5.3.3 Setting the baud rate The current baud rate setting will be displayed. Press [Mode] to cycle through the other options. The following settings are available: b 1200 b 2400 b 4800 (default value) b 9600 © Adam Equipment Company 2004... - Page 16 Press [Zero] to view the next printing parameter. © Adam Equipment Company 2004...
-
Page 17: Parity Settings
Parameters which are set up at the factory and are often referred to as Service Parameters. Check the Service Manuals for more details. Press [Print] to return to weighing. The scale will run the self-test before displaying the zero along with the last selected unit. © Adam Equipment Company 2004... - Page 18 © Adam Equipment Company 2004...
-
Page 19: Calibration
600g 600g 1500g 3000g 7.0 COMMUNICATION WITH A COMPUTER/PRINTER The ACBplus series of scales come with a standard RS-232 interface. The standard Interface parameters are: Connection details are: RS-232 output of weighing data Connector: 9 pin d-subminiature socket ASCII code... -
Page 20: Error Messages
If an error message is shown, repeat the procedure that caused the message such as turning the scale on, calibration or any other functions. If the error message is still shown, contact your dealer for further support. © Adam Equipment Company 2004... - Page 21 © Adam Equipment Company 2004...
- Page 22 © Copyright by Adam Equipment Co. All rights reserved. No part of this publication may be reprinted or translated in any form or by any means without the prior permission of Adam Equipment. Adam Equipment reserves the right to make changes to the technology, features, specifications and design of the equipment without notice. All information contained within this publication is to the best of our knowledge timely, complete and accurate when ...
Need help?
Do you have a question about the ACBplus Series and is the answer not in the manual?
Questions and answers