Threading The Overlock Needle Thread Rn/Green - Bernina L 890 User Manual

Threading

Threading the overlock needle thread RN/green

The thread path for the right overlock needle is marked in green.
For a combostitch with the left overlock needle LN, the green thread path is to be used.
Prerequisite:
•
•
> Pull the thread beneath the thread guide plate to the left and through the green marking of the thread
> Place the thread over the green thread take-up lever cover of the overlock needle and pull it down.
> Pull the thread in the 1st position from the right through the thread guide.
> Hook the thread into the thread guide on the needle holder, corresponding to the needle used.
> Thread the right overlock needle (RN).
> Place the needle thread under the presser foot to the rear left.
96
«Preparing for threading» has been performed. (see page 88)
The presser foot is swung out. (see page 43)
deflection finger.