Bernina L 890 User Manual page 36

My BERNINA overlocker
Stitch view
Changes in this stitch view directly affect the stitch and the machine. All displayed values are set accordingly
by the machine.
1
2
3
4
5
6
7
8
Setting with direct influence on the stitch
• Stitch length setting. (see page 86)
• Differential feed setting. (see page 80)
• Thread tension adjustment setting. (see page 78)
These settings, or changes to them, are saved in the personal memory when the stitch is saved.
Functions with direct influence on the machine
• Needle stop up/down. (see page 48)
• Sewing speed setting. (see page 56)
These settings or their changes remain until they are changed again.
36
3
4
1
5
6
2
«Stitch number/name»
«Stitch view»
«Thread tension»
«Needle stop up/down»
«Stitch length»
«Differential feed»
«Stitch optimizer»
«Sewing speed adjustment»
7 8
Show the actual set stitch name with stitch number.
Show the currently set stitch pattern. Can contain
multiple views (schematic / real or exploded eg flat
seam). The points refer to the number of hidden
views. Tap to switch views.
Show the preset default thread tension value for each
required thread path. Tap to change.
Indicates the position of the needle when the needle
stops. Tap to set.
Indicates the stitch length. Tap to change.
Indicates the preset default value of the differential
Feed. Tap to change.
Show possible stitch results with the setting actions
for stitch optimization. Tap to use.
Determines the maximum sewing speed with the foot
controller pressed down. Tap to change.