DSC PowerSeries Neo 3G2080E Installation Manual page 17

Single INTEGRATED PRODUCT - If You acquired this SOFTWARE with
HARDWARE, then the SOFTWAREPRODUCT is licensed with the HARDWARE
asa single integrated product. In thiscase, the SOFTWAREPRODUCT may only
be used with the HARDWAREasset forth in thisEULA.
Rental - You may not rent, lease or lend the SOFTWAREPRODUCT. You may
not make it available to othersor post it on a server or web site.
Software Product Transfer - You maytransfer allof Your rightsunder thisEULA
onlyas part of a permanent sale or transfer of the HARDWARE, provided You
retain no copies, You transfer allof the SOFTWAREPRODUCT (including all com-
ponent parts, the media and printed materials, any upgrades and this EULA),
and provided the recipient agrees to the terms of thisEULA. If the SOFTWARE
PRODUCT is an upgrade, anytransfer must also include all prior versions of the
SOFTWAREPRODUCT.
Termination - Without prejudice to any other rights, DSC may terminate this
EULA if You fail to comply with the terms and conditions of this EULA. In such
event, You must destroyallcopiesof the SOFTWAREPRODUCT and allof itscom-
ponent parts.
Trademarks - ThisEULA doesnot grant You anyrights in connection with any
trademarksor service marksof DSC or itssuppliers.
3. COPYRIGHT
Alltitle and intellectualpropertyrightsin and to the SOFTWAREPRODUCT (includ-
ing but not limited to any images, photographs, and text incorporated into the
SOFTWAREPRODUCT), the accompanying printed materials, and anycopies of
the SOFTWARE PRODUCT, are owned by DSC or its suppliers. You may not
copythe printed materialsaccompanying the SOFTWAREPRODUCT. Alltitle and
intellectualpropertyrights in and to the content which maybe accessed through
use of the SOFTWARE PRODUCT are the property of the respective content
owner and maybe protected byapplicable copyright or other intellectualproperty
lawsand treaties. This EULAgrants You no rights to use such content. All rights
not expresslygranted under thisEULAare reserved byDSC and itssuppliers.
EXPORT RESTRICTIONS- You agree that You will not export or re- export the
SOFTWARE PRODUCT to any country, person, or entity subject to Canadian
export restrictions.
CHOICEOF LAW - This Software License Agreement isgoverned by the laws of
the Province of Ontario, Canada.
ARBITRATION - All disputes arising in connection with this Agreement shall be
determined byfinaland binding arbitration in accordance with the Arbitration Act,
and the partiesagree to be bound bythe arbitrator'sdecision. The place of arbit-
ration shall be Toronto, Canada, and the language of the arbitration shall be
English.
LIMITED WARRANTY
NO WARRANTY - DSC PROVIDES THE SOFTWARE "AS IS" WITHOUT
WARRANTY. DSC DOES NOT WARRANT THAT THE SOFTWARE WILL MEET
YOUR REQUIREMENTS OR THAT OPERATION OF THESOFTWARE WILL BE
UNINTERRUPTED OR ERROR-FREE.
CHANGES IN OPERATING ENVIRONMENT - DSC shallnot be responsible for
problemscaused bychangesin the operating characteristicsof the HARDWARE,
or for problems in the interaction of the SOFTWARE PRODUCT with non- DSC-
SOFTWAREor HARDWAREPRODUCTS.
LIMITATION OF LIABILITY; WARRANTY REFLECTS ALLOCATION OF
RISK - IN ANY EVENT, IF ANY STATUTE IMPLIES WARRANTIES OR
CONDITIONS NOT STATED IN THIS LICENSE AGREEMENT, DSC'S ENTIRE
LIABILITYUNDER ANYPROVISION OF THISLICENSEAGREEMENT SHALL BE
LIMITED TO THE GREATER OF THE AMOUNT ACTUALLY PAID BY YOU TO
LICENSE THE SOFTWARE PRODUCT AND FIVE CANADIAN DOLLARS
(CAD$5.00). BECAUSE SOME JURISDICTIONS DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR
INCIDENTAL DAMAGES, THEABOVELIMITATION MAYNOT APPLYTO YOU.
DISCLAIMER OF WARRANTIES - THISWARRANTYCONTAINSTHE ENTIRE
WARRANTYAND SHALL BEIN LIEU OF ANYAND ALL OTHER WARRANTIES,
WHETHER EXPRESSED OR IMPLIED (INCLUDING ALL IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE) AND OF ALL OTHER OBLIGATIONSOR LIABILITIESON THE PART
OF DSC. DSC MAKES NO OTHER WARRANTIES. DSC NEITHER ASSUMES
NOR AUTHORIZES ANY OTHER PERSON PURPORTING TO ACT ON ITS
BEHALF TO MOD8IFY OR TO CHANGE THIS WARRANTY, NOR TO ASSUME
FOR IT ANY OTHER WARRANTY OR LIABILITY CONCERNING THIS
SOFTWAREPRODUCT.
EXCLUSIVE REMEDY AND LIMITATION OF WARRANTY - UNDER NO
CIRCUMSTANCESSHALL DSC BE LIABLE FOR ANY SPECIAL, INCIDENTAL,
CONSEQUENTIAL OR INDIRECT DAMAGES BASED UPON BREACH OF
WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT LIABILITY, OR
ANY OTHER LEGAL THEORY. SUCH DAMAGES INCLUDE, BUT ARE NOT
LIMITED TO, LOSS OF PROFITS, LOSS OF THE SOFTWARE PRODUCT OR
ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF SUBSTITUTE
OR REPLACEMENT EQUIPMENT, FACILITIES OR SERVICES, DOWN TIME,
PURCHASERS TIME, THE CLAIMS OF THIRD PARTIES, INCLUDING
CUSTOMERS, AND INJURYTO PROPERTY.
DSC recommendsthat the entire system be completelytested on a regular basis.
However, despite frequent testing, and due to, but not limited to, criminal tam-
pering or electricaldisruption, it ispossible for thisSOFTWAREPRODUCT to fail to
performasexpected.
Regulatory Information
Modification statement
DigitalSecurity Controls Ltd has not approved any changes or modifications to
thisdevice bythe user. Anychangesor modificationscould void the user's author-
ityto operate the equipment.
Digital Security Controls Ltd n'approuve aucune modification apportée à l'ap-
pareil par l'utilisateur, quelle qu'en soit la nature. Tout changement ou modi-
fication peuvent annuler le droit d'utilisation de l'appareilpar l'utilisateur.
Interference statement
Thisdevice complieswith Part 15 of the FCC Rulesand IndustryCanada licence-
exempt RSSstandard(s). Operation issubject to the following two conditions: (1)
thisdevice maynot cause interference, and (2) thisdevice must accept any inter-
ference, including interference that may cause undesired operation of the
device.
Le présent appareilest conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux con-
ditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'util-
isateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
Wireless notice
Thisequipment complieswith FCC and IC radiation exposure limitsset forth for an
uncontrolled environment. The antenna should be installed and operated with
minimumdistance of 20 cmbetween the radiator and your body.
Antenna gain must be below:
Frequency band
GSM850 / FDD V
PCS1900 / FDD II
Thistransmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Cet appareil est conforme aux limites d'exposition aux rayonnements de la IC
pour un environnement non contrôlé. L'antenne doit être installé de façon à
garder une distance minimale de 20 centimètres entre la source de ray-
onnementset votre corps.
Gain de l'antenne doit être ci-dessous:
Bande de fréquence
GSM850 / FDD V
PCS1900 / FDD II
L'émetteur ne doit pasêtre colocalisé ni fonctionner conjointement avecà autre
antenne ou autre émetteur.
FCC Class B digital device notice
Thisequipment has been tested and found to comply with the limits for a Class B
digitaldevice, pursuant to part 15 of the FCC Rules. These limitsare designed to
provide reasonable protection against harmfulinterference in a residential install-
ation. This equipment generatesuses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, maycause harm-
fulinterference to radio communications. However, there is no guarantee that
interference willnot occur in a particular installation. If thisequipment does cause
harmfulinterference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference byone or more of the following measures:
Reorient or relocate the receiving antenna.
l
Increase the separation between the equipment and receiver.
l
Connect the equipment into an outlet on a circuit different from that to
l
which the receiver isconnected.
Consult the dealer or an experienced radio/TVtechnician for help
l
CAN ICES-3 (B) / NMB-3 (B)
FCC ID:F5316TL2803GRE
IC: 160A-TL2803GRE
Notes for EN50131-1:2006/A1:2009 Compliant installations:
Model TL2803G(R) E-EU/3G2080 (R)E- EU/TL280(R) E is an SPT Type Y - the
module ismounted within CIEor PShousing and it receivespower fromthe com-
patible CIEor Power Supplysource that are in compliance with EN50131- 6:2008
Type A requirements for a Grade 2, Class II application. This product has no
replacement parts and software programmable options are accessible at level 3
(installer mode), section [851].
The TL2803G (R) E- EU/3G2080(R) E- EU/TL280 (R) E connects to compatible
DSC alarmcontrolpanels using the DSC proprietary serialinterface and protocol
PC-Link (converted also to RS- 422). The module operates in pass- through
mode and it doesacknowledge the alarmto the compatible controlpanelafter an
acknowledgement hasbeen received fromthe compatible alarmreceiver.
1. The TL2803G(R)E-EU/3G2080(R)E-EU/TL280(R)Emodule ismonitored by
the controlpaneland it isprogrammed via the programming menu (* 8, sec-
tion [851] in the controlpanel. The interface isconnected to the PC-Linkbus
17
TL2803GRE, TL2803GE,
3G2080RE, 3G2080E
xxxdBi
xxxdBi
TL2803GRE, TL2803GE,
3G2080RE, 3G2080E
xxxdBi
xxxdBi