Key-Disp KD218 User Manual page 17

◆ Password Disable
In "Start PassWord" interface, choose 'OFF' and short press( less than 0.5S) MODE to confirm.
Meanwhile, display interface prompts for a password. The display will be powered off
automatically when the same password is entered incorrectly after 10 inputs. When a correct
password is input, the display will give a prompt of 'password function disabled'. After 2 seconds,
the interface will be redirected to original settings page. Hold MODE for more than 2 seconds to
exit to the main page or by route' BACK'
■If there ain't any operations in one minute, display will exit the settings interface
automatically.
◆Exit Settings
In the settings state, press the "MODE" button (short than 2s) is to confirm the input.
Hold the "MODE" button (for more than 2s) is to store the settings, and then exit the
current settings. Hold the "-" button is to cancel the operating but not storing settings data,
and then return to previous menu.
■If there is not any operations in one minute, the display will exit the settings state.
Quality Assurance and Warranty Scope
Ⅰ Warranty
（1）The warranty will be valid only for products used in normal usage conditions.
（2）The warranty is valid for 24 months after the shipment or delivery to customers
The following cases do not belong to our warranty scope.
Ⅱ
1、The display is demolished.
2、The damage of the display is caused by wrong installation or operation.
3、Shell of the display is broken when the display is out of the factory.
4、Wire of the display is broken.
5、The fault or damage of the display is caused by the force majeure (e.g., fire,
earthquake, etc.).
6、Beyond Warranty period.
◆Connection Layout
'EXIT'. The operation steps are as follows:
→
■